Dumpolina
SILVER Star
Potentially very interested.
I'll pm ya
I'll pm ya
For Sale @ High Desert Cruisers (9 Viewers)
- Thread starter Ruadhrigh
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
posted some manuals in the classifieds. Any of the aftermarket manuals free to pickup. Shawn may be interested in the Spicer D60 manual.
https://forum.ih8mud.com/threads/miscellaneous-manuals.813498/
https://forum.ih8mud.com/threads/miscellaneous-manuals.813498/
posted some manuals in the classifieds. Any of the aftermarket manuals free to pickup. Shawn may be interested in the Spicer D60 manual.
https://forum.ih8mud.com/threads/miscellaneous-manuals.813498/
make offer:
also have 2 small Suntune 8k tachs,
mechanical water temp
mechanical oil pressure
2 soft top/bikini top windshield channels
2 Mr. Gasket rim screw sets (poor man's beadlocks)
1/8" steel weld-in corner gussets
Explorer pro-comp limiting straps
wheel bearings for 3500# trailer axle
pair Hella H4 55/60 bulbs
fj60 distributor boot
Ingersoll-Rand d/a sander (air), I think it needs rebuilt
80-series front lower control arms $40
Dewalt 14" chop saw, threads soft and kinda buggered on clamp, $80
Western Safety (harbour freight or northern tool) auto-darkening welding helmet $20
https://forum.ih8mud.com/threads/miscellaneous-manuals.813498/
make offer:
also have 2 small Suntune 8k tachs,
mechanical water temp
mechanical oil pressure
2 soft top/bikini top windshield channels
2 Mr. Gasket rim screw sets (poor man's beadlocks)
1/8" steel weld-in corner gussets
Explorer pro-comp limiting straps
wheel bearings for 3500# trailer axle
pair Hella H4 55/60 bulbs
fj60 distributor boot
Ingersoll-Rand d/a sander (air), I think it needs rebuilt
80-series front lower control arms $40
Dewalt 14" chop saw, threads soft and kinda buggered on clamp, $80
Western Safety (harbour freight or northern tool) auto-darkening welding helmet $20
Last edited:
yes, I would like the D60 manual if I can get it. are the gauges compatible with a 1FZ? (all of them-tach, water temp and oil press)
I'll see what we can do to get that manual and maybe the gauges to you. The tachs need a coil hookup and both should be set for a 6 cyl. The mechanical gauges would definitely work, but you may have to find some metric to NPT bushings to install them. I've seen some that fit close enough not to leak, but I couldn't say in this instance. Let me know.
let's do the manual for now. the gauges aren't up on the list very high for me.
Shawn, if you go with the gauges I might have the metric to NPT adapters.
hmmm. thinking about it. I was thinking of newer gauges with back light, but for lower cost this may be the ticket....
BFG All Terrain tires LT 295/75 R 16 (12.5 x 33 inches) mounted on 16 inch FJ-80 Land Cruiser alloy rims (1991-1997). These are six lug rims.
Set of 5 with center caps and lug nuts.
Four tires are at 50% tread. One is brand new.
$1000 obo.
Located in Salida, Colorado, but I can deliver to Albuquerque.
505-238-2840
Set of 5 with center caps and lug nuts.
Four tires are at 50% tread. One is brand new.
$1000 obo.
Located in Salida, Colorado, but I can deliver to Albuquerque.
505-238-2840
Replaced the heavy duty custom cage that came with my rig with an original stock roll bar. Anyone up north interested? $350 and I can meet you somewhere on I25.
SOLD
For sale
ZEP parts cleaner. Half full of solvent. Will deliver in abq area.
$200.00 OBO
For sale
ZEP parts cleaner. Half full of solvent. Will deliver in abq area.
$200.00 OBO
Last edited:
Sold!
Land Cruiser fj60 front hubs.
$50.00
Insides look great.
Land Cruiser fj60 front hubs.
$50.00
Insides look great.
Last edited:
· 2008 Land Cruiser for Sale in Albuquerque, $37,000
· Silver with gray interior, 53,000 miles
· Beautiful truck, ready for off-road travel
· All 2008 available factory options including
o Navigation
o Rear view camera
o Console refrigerator
o Rear seat heat, A/C, DVD
o Remote start
o Glass break detector on security system
· Owner installed off road equipment
o ICON 2" front lift
o ICON shocks front and rear
o Total Chaos UCAs
o ARB 722 rear springs (1.5” lift)
o Nitto Terra Grappler 275/70R18 tires (33") with 30.000 miles
o Slee Sliders
o ARB bumpers front and rear (park sensors removed)
· Other owner add-ons
o Dark tinted windows
o Tekonsha P3 trailer brake controller
o Yaesu FTM-350R ham radio
o Prestigious Society navigation mod
· Excellent condition
o Always kept in garage
o Serviced by Toyota exclusively
o Perfect mechanical condition
o No squeaks or rattles
o No ill effects from lift
o No driveshaft clunk
o Excellent interior
o Excellent paint for a 2008
o Body damage from 2011 HDC Christmas tree run perfectly repaired
o Scratches on ARB bumpers
The picture is several years old. As soon as I detail it and take new pictures, I will post in the classifieds on the ih8mud 200 forum. Call me at 505-three-three-one-5014.
· Silver with gray interior, 53,000 miles
· Beautiful truck, ready for off-road travel
· All 2008 available factory options including
o Navigation
o Rear view camera
o Console refrigerator
o Rear seat heat, A/C, DVD
o Remote start
o Glass break detector on security system
· Owner installed off road equipment
o ICON 2" front lift
o ICON shocks front and rear
o Total Chaos UCAs
o ARB 722 rear springs (1.5” lift)
o Nitto Terra Grappler 275/70R18 tires (33") with 30.000 miles
o Slee Sliders
o ARB bumpers front and rear (park sensors removed)
· Other owner add-ons
o Dark tinted windows
o Tekonsha P3 trailer brake controller
o Yaesu FTM-350R ham radio
o Prestigious Society navigation mod
· Excellent condition
o Always kept in garage
o Serviced by Toyota exclusively
o Perfect mechanical condition
o No squeaks or rattles
o No ill effects from lift
o No driveshaft clunk
o Excellent interior
o Excellent paint for a 2008
o Body damage from 2011 HDC Christmas tree run perfectly repaired
o Scratches on ARB bumpers
The picture is several years old. As soon as I detail it and take new pictures, I will post in the classifieds on the ih8mud 200 forum. Call me at 505-three-three-one-5014.
hey Kit! sorry to see your cruiser going. it is definitely set up well. they did a good job on the repair!
The shop that did the body work is a high-end place that works on very expensive German stuff. They did a very nice job.
Lovey
Oct 2004
House for sale in Eldorado @ Santa Fe if you know anybody looking.
http://www.owners.com/nm/santa-fe/7-recado-road/gww5935
http://www.owners.com/nm/santa-fe/7-recado-road/gww5935
I would love to have that rig Kit. Someone is going to get a well setup Cruiser. Good luck with the sale.
-Mike-
-Mike-
Very nice 200-series. I wish I could justify buying it and had the money for it.
Looks like the time is here to sell my wife's mall cruiser. It's in good shape and runs well. It's a 2004 Land Cruiser. We've owned it for three years. Prior to us owning it, it spent the majority of it's life in AZ as far as we know. It has around 189k miles. It's been maintained locally at American Toyota for the last 3 years. Beige exterior and interior. It's completely stock and ready for someone to build it up. I'd think about building it up but I already have a build 99 LC. Hard to justify having two...I'm asking $18500. It's a great cruiser and will run for ever if you take care of it. I'll get some pics posted soon. Let me know if you have any interest and I can get more details.
SOLD
16 knuckle studs
Part # 90126-12005
$24.00
16 knuckle studs
Part # 90126-12005
$24.00
Last edited:
