fjz80 Coolant leak around bypass pipe (2 Viewers)

[Kernal]

Glad you found it.

Agree with stuffing something in the crack from both sides, maybe like a Marine grade epoxy, smoothed off on the inside so as not to interfere with the O-rings or the pipe, will likely last years.

 

[xxtavixx]

Glad you found it.

Agree with stuffing something in the crack from both sides, maybe like a Marine grade epoxy, smoothed off on the inside so as not to interfere with the O-rings or the pipe, will likely last years.

That's my leading plan. I just cannot justify removing the head to get that off.

 

[Kernal]

The crack would likely benefit from a good cleaning before using the epoxy, maybe a brass "toothbrush" would help along with some supercleaners to remove any build-up of crud??

 

[BILT4ME]

Yea, 1131066020 is what I keep coming to - but leary since all the pictures dont look like it.

from toyota:
View attachment 3078208

​

You saw the pic I posted, right?

You can pull the same from.the McGeorge Toyota site as well.

 

[BILT4ME]

Look at the pics from @SNLC in the following post.

This pretty definitive that it's one piece an the part number is what you need.

Post in thread 'What Did You Do with Your 80 This Weekend?' What Did You Do with Your 80 This Weekend? - https://forum.ih8mud.com/threads/what-did-you-do-with-your-80-this-weekend.586191/post-14552559

 

[Broski]

That's my leading plan. I just cannot justify removing the head to get that off.

The timing chain cover can come off without pulling the head

 

[xxtavixx]

The timing chain cover can come off without pulling the head

It can, but it appears that its worse than pulling the head.

That said, I have resolved my issue. I welded the crack. Well, my wallet welded the crack

 

[BILT4ME]

It can, but it appears that its worse than pulling the head.

That said, I have resolved my issue. I welded the crack. Well, my wallet welded the crack

I want to see pics. Did you remove the cover of have it welded in place?

That was a feat if someone welded that in place.

YOU MUST SHARE!

 

[xxtavixx]

I want to see pics. Did you remove the cover of have it welded in place?

That was a feat if someone welded that in place.

YOU MUST SHARE!

Welded it in the vehicle, here is a picture of it welded and smoothed out. And yes, i knew it would require a very good tig welder.

 

[Broski]

Welded it in the vehicle, here is a picture of it welded and smoothed out. And yes, i knew it would require a very good tig welder.

View attachment 3089121

How’s it holding?

 

[BILT4ME]

Welded it in the vehicle, here is a picture of it welded and smoothed out. And yes, i knew it would require a very good tig welder.

View attachment 3089121

This provides hope and help to the next guy this will happen to.

Thanks for posting info about it.

 

[xxtavixx]

How’s it holding?

Like a champ, and FL summers are no joke