shanko
GOLD Star
Ugh! I am stuck and need some help. I have searched for several hours through the forum but can't locate an answer. But I know that many people have solved this and someone can quickly provide a direct answer.
Here is my situation: I have a 1989 US-version FJ62. Transplanted a 12HT into the truck. The mechanic that did the swap cut the truck-side three-prong connector to the alternator and just hooked up one wire to the alternor's three-prong connector (not talking about the alternator B terminal here). I would like to reconnect all three wires to the alternator. My alternator has an internal IC Regulator and is 12V.
I am having a tough time determining which wires connect to which wires. I have attached pictures for reference. I would be very grateful if someone can tell me specifically which wires from the wiring harness connect to which of the alternator wires. Also, can someone tell me which of the three alternator wires (red, blue, white) correspond to S, L, and IG on the wiring diagram.
Pic #1: shows the internal IC Regulator and the three wires from the green connector (red, blue, white)
Pic #2: Shows the backside of the green connector (red, blue, white wires)
Pic #3: Shows the three wires from my wiring harness. Also, you can see that two of the wires (thicker white wire, medium sized yellow wire) have been cut. Also, you can see that the B-Y wire has a connector; this was the only single wire that was connected to the green alternator three-prong connector.
Can someone tell me the proper way to connect these three wires to the green connector?
Pic #4: Diagram from the 12HT Repair Manual. Can someone tell me which wires in the alternator (red, blue, white) correspond to S, L, and IG?
Thanks in advance!
-Sean
Here is my situation: I have a 1989 US-version FJ62. Transplanted a 12HT into the truck. The mechanic that did the swap cut the truck-side three-prong connector to the alternator and just hooked up one wire to the alternor's three-prong connector (not talking about the alternator B terminal here). I would like to reconnect all three wires to the alternator. My alternator has an internal IC Regulator and is 12V.
I am having a tough time determining which wires connect to which wires. I have attached pictures for reference. I would be very grateful if someone can tell me specifically which wires from the wiring harness connect to which of the alternator wires. Also, can someone tell me which of the three alternator wires (red, blue, white) correspond to S, L, and IG on the wiring diagram.
Pic #1: shows the internal IC Regulator and the three wires from the green connector (red, blue, white)
Pic #2: Shows the backside of the green connector (red, blue, white wires)
Pic #3: Shows the three wires from my wiring harness. Also, you can see that two of the wires (thicker white wire, medium sized yellow wire) have been cut. Also, you can see that the B-Y wire has a connector; this was the only single wire that was connected to the green alternator three-prong connector.
Can someone tell me the proper way to connect these three wires to the green connector?
Pic #4: Diagram from the 12HT Repair Manual. Can someone tell me which wires in the alternator (red, blue, white) correspond to S, L, and IG?
Thanks in advance!
-Sean