Wanted FJ60 Manual (1 Viewer)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Re:wanted
LOL H. Yeah, like you see me winning any fawking elections soon?
Dang it Idave. I was counting on you dude.
LOL H. Yeah, like you see me winning any fawking elections soon?
Dang it Idave. I was counting on you dude.
5 SPEED FOR FZJ-80 Conversion
just did that swap,on a Turbo 4Runner, and
now it halls ass with the installed 5 speed conversion
"I Did "
What do they do in OZ for the 5 speed coversion in the FZJ-80's
just did that swap,on a Turbo 4Runner, and now it halls ass with the installed 5 speed conversion
"I Did "
What do they do in OZ for the 5 speed coversion in the FZJ-80's
5 SPEED FOR FZJ-80 Conversion
I am bringing in an H150F from a '94 FZJ80. Your choices that I know of are the H151F or the H150F. The H151F is a direct bolt in to your 4.5 and tranfercase. The H150F is out of a diesel and has a different input shaft but has lower first, second, third gears. You run the Toy PP and a chevy disc.Things to consider are expensive pedal assy, different drive shafts, expensive clutch, possible mods to the ABS, possibly use an Aussie computer, and if you are in California forget it. Because the FZJ never came to the US with a manual there is no way to legally smog it. I have made good sources in Oz if you want me to ask. My 4.5, 5 speed and transfer are all going in my 55. Shipping the trans is expensive.
Later, Jeff
I better add that the trans I am getting is out of an HDJ80 for the technical.
I am bringing in an H150F from a '94 FZJ80. Your choices that I know of are the H151F or the H150F. The H151F is a direct bolt in to your 4.5 and tranfercase. The H150F is out of a diesel and has a different input shaft but has lower first, second, third gears. You run the Toy PP and a chevy disc.Things to consider are expensive pedal assy, different drive shafts, expensive clutch, possible mods to the ABS, possibly use an Aussie computer, and if you are in California forget it. Because the FZJ never came to the US with a manual there is no way to legally smog it. I have made good sources in Oz if you want me to ask. My 4.5, 5 speed and transfer are all going in my 55. Shipping the trans is expensive.
Later, Jeff
I better add that the trans I am getting is out of an HDJ80 for the technical.
5 SPEED FOR FZJ-80 Conversion
OH BOY, NO 5SP in california
then what if i move to Idaho then.
Jeff thanks so much,
R151F is that the same as the Turbo 4x4 tranny in the 1986/87
4cyls that can tolerate 500HP daily.?
OH BOY, NO 5SP in california
then what if i move to Idaho then.
Jeff thanks so much,
R151F is that the same as the Turbo 4x4 tranny in the 1986/87
4cyls that can tolerate 500HP daily.?
fj40 interior pieces needed
Looking for some small stuff...
-one interior door latch bezel-black
-one cap for the side defrost vents
-the Defroster/Heater selector linkage (on the side of the heater)
-one of the defroster vent fins near the front windshield...(there are 2 black ones...one of mine had been drilled)
Thanks for any help
Don
Looking for some small stuff...
-one interior door latch bezel-black
-one cap for the side defrost vents
-the Defroster/Heater selector linkage (on the side of the heater)
-one of the defroster vent fins near the front windshield...(there are 2 black ones...one of mine had been drilled)
Thanks for any help
Don
Speedo Cable
Just wondering if anyone has got one. I've got a complete 2f siting in my garage, so if you want to trade for something off of it I'll be down for that.
Just wondering if anyone has got one. I've got a complete 2f siting in my garage, so if you want to trade for something off of it I'll be down for that.
HARD TOP
I might have what you are looking for.
There is some rust near the top of the ambie doors.
I live in St. Helens, 20 min. from Longview.
Let me know if you are interested and I will take some pics.
I have the ambie doors as well. Fairly rusty at the bottom.
I might have what you are looking for.
There is some rust near the top of the ambie doors.
I live in St. Helens, 20 min. from Longview.
Let me know if you are interested and I will take some pics.
I have the ambie doors as well. Fairly rusty at the bottom.
Speedo Cable
Not sure if this helps or not, I bought a new cable from ccot that is a one piece from the back of the speedo all the way to the t'case.
http://store.yahoo.com/coolfj40/speedcabfjfj.html
After market it is only 15.00. Worked well.
Not sure if this helps or not, I bought a new cable from ccot that is a one piece from the back of the speedo all the way to the t'case.
http://store.yahoo.com/coolfj40/speedcabfjfj.html
After market it is only 15.00. Worked well.
wanted
[quote author=Junk link=board=6;threadid=10981;start=msg98652#msg98652 date=1075844588]
[quote author=Junk link=board=6;threadid=10981;start=msg98652#msg98652 date=1075844588]
- high paying job with little or no work required.
[/quote]
Just go on unemployment and get signed up for welfare, foodstamps, etc.
You'll prolly take in 2000/mos. with all of your bills paid.
Make sure you don't work though, they'll take it all away.
wanted
[quote author=fjcruiser link=board=6;threadid=10981;start=msg99483#msg99483 date=1075952279]
Just go on unemployment and get signed up for welfare, foodstamps, etc.
You'll prolly take in 2000/mos. with all of your bills paid.
Make sure you don't work though, they'll take it all away.
[/quote]
I dunno. I was pimping pics of yo momma, but the SPCA came down on me pretty hard.
[quote author=fjcruiser link=board=6;threadid=10981;start=msg99483#msg99483 date=1075952279]
Just go on unemployment and get signed up for welfare, foodstamps, etc.
You'll prolly take in 2000/mos. with all of your bills paid.
Make sure you don't work though, they'll take it all away.
[/quote]
I dunno. I was pimping pics of yo momma, but the SPCA came down on me pretty hard.
red66toy
Supporting Vendor
Fuel line from pump to carb
TTT
TTT
cruiser_guy
Out of Africa / North Africa
Fuel line from pump to carb
I know it's out of your date range but I've got one from a '71 FJ40 if there is a chance that works.
I know it's out of your date range but I've got one from a '71 FJ40 if there is a chance that works.
5 SPEED FOR FZJ-80 Conversion
[quote author=lagwagon link=board=6;threadid=10999;start=msg98934#msg98934 date=1075877914]
I better add that the trans I am getting is out of an HDJ80 for the technical.
[/quote]
Jeff, you mean your H150f is out of an HZJ80
Did you get a part time transfer? Wanna trade with a non-VC full time?
Dave
[quote author=lagwagon link=board=6;threadid=10999;start=msg98934#msg98934 date=1075877914]
I better add that the trans I am getting is out of an HDJ80 for the technical.
[/quote]
Jeff, you mean your H150f is out of an HZJ80
Did you get a part time transfer? Wanna trade with a non-VC full time?
Dave
5 SPEED FOR FZJ-80 Conversion
Thank you! I figured someone would straighten that out. I have 3 '91 T/Cs already and decided not to worry about the part time T/C and might even run the V/C T/C. I have 3 of those too.
Too much. Too much.
Thank you! I figured someone would straighten that out.
I have 3 '91 T/Cs already and decided not to worry about the part time T/C and might even run the V/C T/C. I have 3 of those too.Too much. Too much.
T
tnt40
Guest
Re:Speedo Cable
I might have it. I have 20" of snow to crawl through and I'll let you know. Getting 4"-8" tonight.
I might have it. I have 20" of snow to crawl through and I'll let you know. Getting 4"-8" tonight.
