Wanted FJ60 Manual (2 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
looking for driver side seat rail assemblies
I have them. My stock upholstery is wasted but the hardware is fine. Just sitting there.
You can have what you want for shipping.
ted.christian@umontana.edu
I have them. My stock upholstery is wasted but the hardware is fine. Just sitting there.
You can have what you want for shipping.
ted.christian@umontana.edu
euclid
SILVER Star
WTB one OEM wheel from a 60 series
Prefer 62, but a 60 wouldn't bother me. I need it for a spare LTB
Thanks John.
GT
Prefer 62, but a 60 wouldn't bother me. I need it for a spare LTB
Thanks John.
GT
WANTED: Diaphragm from 2F carb
Hi!
Toyota no longer seems to have the housing for the diaphragm that opens
the secondary throttle valve. And the PO of my 60 seems to have thought
he didn't need one, so mine is missing.
I have the actual diaphragm and gasket, now I just need the housing for it.
If you have an old 2F carb laying around, please please please let me know.
Thanks.
Hi!
Toyota no longer seems to have the housing for the diaphragm that opens
the secondary throttle valve. And the PO of my 60 seems to have thought
he didn't need one, so mine is missing.
I have the actual diaphragm and gasket, now I just need the housing for it.
If you have an old 2F carb laying around, please please please let me know.
Thanks.
yooper
SILVER Star
Wanted: Lift Hatch Hinge for FJ62
One of my hatch hinges failed. New parts are available but $$.
Mine is a 12/89 FJ62 but I think any 60-series hinge will work. If you are parting out a non-rusty 60 series wagon and have these hinges let me know.
I'll take two if they are nice.
One of my hatch hinges failed. New parts are available but $$.
Mine is a 12/89 FJ62 but I think any 60-series hinge will work. If you are parting out a non-rusty 60 series wagon and have these hinges let me know.
I'll take two if they are nice.
red66toy
Supporting Vendor
Fuel line from pump to carb
Hi, I need the fuel line that runs from the fuel pump to the carb. I own a 64 FJ40 but spector says 58 through 3/69 used the same line. I am located in Arcata, CA( northern california). If this helps I need #13 in the picture. Thanks.
Hi, I need the fuel line that runs from the fuel pump to the carb. I own a 64 FJ40 but spector says 58 through 3/69 used the same line. I am located in Arcata, CA( northern california). If this helps I need #13 in the picture. Thanks.
Need Turn Signals & Apron Lights
I am looking for a set of late '50's/early '60's ROUND turn signal lights for front. Also need a set of the small round apron lights found on the front (near the bib) of the older cruisers. If anyone out there has some, let me know what you want for them. Thanks.
I am looking for a set of late '50's/early '60's ROUND turn signal lights for front. Also need a set of the small round apron lights found on the front (near the bib) of the older cruisers. If anyone out there has some, let me know what you want for them. Thanks.
'95-97 spare wheel
Looking for one '95-7 alloy rims for a spare.
Looking for one '95-7 alloy rims for a spare.
WANTED: Diaphragm from 2F carb
I have an old 2F card from an 84FJ60. Make me an offer. you can email me at markdud@comcast.net or leave a message here.
Mark
I have an old 2F card from an 84FJ60. Make me an offer. you can email me at markdud@comcast.net or leave a message here.
Mark
Re:Need Turn Signals & Apron Lights
The second piece you seek is available new, and for not that much cash from SOR, or from a Toyota delaer, with an orange lense, SOR has the repo-clear lenses which is what would have been on pre 66 40s..
The first piece...
IIRC, the early Land Crusiers had a dual lense, both front and rear of the front turn singnal housing that mounted on the fender, is this what you are looking for, or do you simply want the 'round' style fender mounted turn signal assembly that was used after that on the 40 series until 08/68?
-Steve
The second piece you seek is available new, and for not that much cash from SOR, or from a Toyota delaer, with an orange lense, SOR has the repo-clear lenses which is what would have been on pre 66 40s..
The first piece...
IIRC, the early Land Crusiers had a dual lense, both front and rear of the front turn singnal housing that mounted on the fender, is this what you are looking for, or do you simply want the 'round' style fender mounted turn signal assembly that was used after that on the 40 series until 08/68?
-Steve
- Joined
- Jun 28, 2002
- Threads
- 165
- Messages
- 2,105
- Location
- Colorado Springs, CO
- Website
- www.mntoyx4.com
Wanted: Lift Hatch Hinge for FJ62
Call cruiserparts.net. I bought one last year for $5.
How sweet is that compared to $pector!
Call cruiserparts.net. I bought one last year for $5.
How sweet is that compared to $pector!
Need Turn Signals & Apron Lights
I am just looking for the round style turn signal assembly that mounts on the fenders (does not need to be dual lense). Thanks.
I am just looking for the round style turn signal assembly that mounts on the fenders (does not need to be dual lense). Thanks.
bjowett
Supporting Vendor
'95-97 spare wheel
I have a bunch of 93/94 16" alloys... make an offer if they'll do.
I have a bunch of 93/94 16" alloys... make an offer if they'll do.
bjowett
Supporting Vendor
Need stock FZJ80 coils in Sacramento area
Sorry, I'm on the other coast.
Sorry, I'm on the other coast.
33 x 9.5.10.5 or 11.5 wanted
Looking to trade late 50's early 60's Cuddy Cabin 16 ft boat and trailer for some mud tires for the cruiser. Boat is sea worthy with new plywood and carpet. Will send pics on request. Great for cruising. Looking for some good mud tires.
thanks, location Washougal, Wa
Looking to trade late 50's early 60's Cuddy Cabin 16 ft boat and trailer for some mud tires for the cruiser. Boat is sea worthy with new plywood and carpet. Will send pics on request. Great for cruising. Looking for some good mud tires.
thanks, location Washougal, Wa
'95-97 spare wheel
I have a bunch of those also. Did you get any of those wrecks? I need one '95-97 that is straight to powdercoat for my spare so it doesn't even have to be pretty.
I have a bunch of those also. Did you get any of those wrecks? I need one '95-97 that is straight to powdercoat for my spare so it doesn't even have to be pretty.
good h55f
i am looking for a nice H55F for my 60 anyone have or know of one for sale? thanx
i am looking for a nice H55F for my 60 anyone have or know of one for sale? thanx
4" lift springs needed
Gumby has a set in the For Sale section. He said he'd paint for $200 or make him an offer for as is.
The title is Dar 4" lift springs
Gumby has a set in the For Sale section. He said he'd paint for $200 or make him an offer for as is.
The title is Dar 4" lift springs
yooper
SILVER Star
Wanted: Lift Hatch Hinge for FJ62
They quoted me $20 each!
Waitin' on CDan - he might have a connection to a wrecked 60...
They quoted me $20 each!
Waitin' on CDan - he might have a connection to a wrecked 60...
WTB FJ60 rear lift gate
Rear lift gate (top) for an 87 FJ60. Must be in excellent shape - no rust. Please e-mail Mike@uxcomm.com.
Thanks
Rear lift gate (top) for an 87 FJ60. Must be in excellent shape - no rust. Please e-mail Mike@uxcomm.com.
Thanks
