Wanted FJ60 Manual (2 Viewers)

[3pits]

40 62 parts wanted

Parts wanted:
62 ac vents adjustable
62 seats
62 antenna and motor


york ac for oba
hubs for 78 or 88
birfields and inners
62 hand throttle cable and mounting bracket

of course lockers and many other parts you probably wont give up!

 

[samsr]

sent pics

 

[orangefj45]

$100 plus shipping stockton CA

 

[nick]

'74 front lights aren't sided. I got a couple. How complete do they have to be?

 

[nuclearlemon]

still looking...even be interested in a pair or set.

 

[MCMan]

I dont think the 75 was a fine spline on the output flange but if it is i would be interested.

Thanks

 

[Oreo]

PM'd you.

 

[74fj40]

hey scott how bout that windshield?? and how much for the roll cage?

 

[320t]

rear disc brake mounting brackets needed

Helping a buddy out with RDB conversion. Looking for anybody who might have an extra set of bolt on rear disc brake mounting brackets for early FJ40. High school student learning how to wrench and ride. any leads would be appreciated. Thanks Don

 

[MUDMONSTER44]

transf

i have a 66 with tranny attached in wash state 150.00 you pay shipping

 

[haystax]

I've got two - we're talking small rectangular sized right? I'd rather you take them both than leave me with one though. Complete housing, lens, mounting hardware - used from MR_MANNY on this board.

Let me know what you want.

 

[dmleonard]

F head for fj40

I need a head for a 74 fj40. The one I have just cracked. Would prefer one that is rebuilt or in good condition, but would take a core if that's all I can get. I am in Minneapolis, MN and the zip is 55426 for shipping.
Thanks,
Dan

 

[wngrog]

Got him covered, delivery to the Ramble

 

[AKcruzr]

I have a good head that came off of a running 75 2f motor. I think the 74 motors were a transition year would you happen to know if my 2f head would fit your motor. will $150. plus shipping work for you

 

[2badfjs]

should work

no problem
i think it will give you more compression.
common mod

 

[cruiserdawg]

Need rear wiring loom

Need rear wiring loom for a 1978 model FJ40 (the one that connects on the firewall and goes back to the rear lights). Thanks.

 

[CruisinGA]

Thanks guys!

Yep Nolen's got me covered on this one...

Thanks to David for carrying it back to Atlanta with him from the Ramble...

Paypal in your box, Nolen...

 

[Mikesta]

Some good axles for my FJ45 LV

I dont even know what to look for.. I think 1976 + allowed the disk brake?

thanks!

 

[3_puppies]

I've got one from a 76 or 77, should almost be the same. $20 for the rear, $45 for the whole thing including some switches

 

[65swb45]

I've got 3 rebuilt 74 heads on the shelf. Call the shop Friday if you're interested.