Wanted FJ60 Manual (6 Viewers)

[DBrown2]

btt

 

[sleeoffroad]

We have to in good shape. $100 a piece. No rust. One from a 02, one from a 03. With bolts. No wiring. Call or pm if you want it.

 

[JasonH]

Frank, how much? Mike, I sent you an e-mail. Thanks for the responses!

 

[Jukelemon]

Jason:

There is one on ebay right now.

JL

 

[Jukelemon]

Soft Top

Come on, buy a hard top and let me buy your ST ( :

Thanks.

 

[Josie'sLandCruiser]

Hi All:

Ron, the quickest/easiest way to tell a "F" motor from a "2F " in my opinion is to look at the valve cover - the 'cover on the "F" is stamped steel while on the "2F" it is aluminum.

Also, I believe that the first couple of digits on the engine serial number will be either "F" or "2F" (found on the passenger's side of engine, above & to the left of the distributor.)

HTH.

Regards,

Alan
Seattle

 

[Josie'sLandCruiser]

Hi All:

Hey "Mikesta," we have an informal TLC club here in Seattle. See <www.seattlecruiserheads.com> for more info.

Regards,

Alan

 

[SINCITY100]

Does anyone who has replaced their stock exhaust have the OEM muffler (center) they would like to sell? The Borla cat back is on factory backorder and is out 6 weeks. My existing muffler is shot and I am afraid the patch job I did won’t last the upcoming trip to the Outer Banks!
If you kept your stock muffler and want to sell send me a PM with your asking price. Thanks. – Jon

DAMN !!
I tossed my (perfect) OE muffler in the dumpster last weekend !!

I was lookng at it taking up space in my garage,and thought...why the hell would I ever need this thing ?...It Figures !!

 

[arcteryx]

Thanks - I will check it out.

 

[srestum]

Hard Top/Windshield Bracket?

I finally found a hard top, but it did not come with the windshield to hard top bracket. Specter calls it a visor?, but its the bracket that is riveted to the top and bolts the hard top down to the winshield. Without it my hard top becomes a sail. Need a pre 1975 version. Thanks, Scott

 

[Jukelemon]

1976-1978 Aisin carb. Condition Rebuildable

I need a stock Aisin from a 1976-1978 FJ40 2f. Condition can be either working or not working i.e. in need of rebuild. I would prefer the in need of rebuild condition.

Thanks.

 

[cruiserbrett]

I have one for you. I can get it this week. How does $40 shipped sound?

 

[Western Slope]

PS pump pulley

Found power steering setup for my conversion. It's from an 84 4WD p/u. complete except for pump pulley. It appears that it needs to accept approx. 1/2 inch shaft with keyway. Any one have one or know where to get right one or equivalent? Thanks,

can reply here or at work at: gerald@chambersandassocaiates.com

 

[bkgiii]

Springs - '96

I know all of you out there that have 'OME'-ed yourself MUST have your old springs gathering dust (or rust) somewhere.....

I'm looking for rear springs for my '96 LX...preferably with low miles on them...

 

[tucker74]

I've got some off my '94 w/ 100k on them - you can have them for the cost of shipping if interested.

Let me know -

Tucker

 

[ClemsonCruiser]

e-mailed you ........

jp

 

[Cruise1977]

I have a 74 hard top I'm selling in Virginia for $50.

Josh

 

[Cruise1977]

I have a few of the linkages but not al them, or the pedal if it helps. I could send you all I have for $15. Let me know if you want some pics. I think the linkages I have are everything you need except for the pedal and one bracket that holds the linkage on the firewall.

Josh

 

[MiniPigg]

1977 FJ55 Parts I need.

I need a few items for my 1977 pig. Here is a list of items I need.


[1] Passengers front turn signal housing. I have two complete ones but the bases are fricken rusted out. The rest is solid.

[2] Tailgate release handle. Mine is busted but still works for now.

[3] Hubcap for the rear. Looking for dent free as possible.


Hmm? Pto? Winch? Well maybe not now... well send me a pm with prices and condition of all items. I am in Boise Idaho.

 

[macneill]

Rats! I left mine at the exhaust shop too. Never thought I would ever need or use it again, nor do I have the room to store the system.

I think the Borla is just right for sound. It's actually wasn't as throaty as I thought it was going to be, then again with the cabin so well insulated, I'm not surprised. With the rear vent windows open, I can hear it a bit better.

The only time it really burbles is with a slight load. Not at all intrusive on the freeway. If you're expecting a Gibson or Cherry bombs, this won't be it.