Wanted FJ60 Manual (6 Viewers)

[yoda-g3]

29 Tooth Transition Gear for 4spd Tranny / 3spd Tcase Combo

Doing the 4spd Tranny / 3spd Tcase Combo. I have a lead on cheap bearings to do this, I just need the gear. I heard that you might be able to get it out of a '74+ 4spd tcase?

Or anyone have a complete kit laying around they swapped out a toybox for?? I know JT outfitters sells them as a set...

 

[cahilc]

TreerootCo, great info, thanks.

Follow up question, is the DGES/DGAS the same casting as a DGMS ? I remember somebody in the Weber circles commented the casting was different for the DGMS ?

Thanks in advance,
Cahil

 

[treerootCO]

TreerootCo, great info, thanks.

Follow up question, is the DGES/DGAS the same casting as a DGMS ? I remember somebody in the Weber circles commented the casting was different for the DGMS ?

Thanks in advance,
Cahil

not sure about that one.

 

[cruiser_guy]

Cruiserparts.net has the gear new for $75.

 

[cruiseroutfit]

$75 in stock

 

[customcruiser]

I have 1 from a 75 with drum brakes. Will that work?

i really need one out of an early 71.... i thinks that when they changed

but i think can make it work......

what do you want for it??

 

[tnt40]

How about $60 plus the ride? You can paypal me if that works out.

 

[zornff]

4wd Shift Knob

I need a transfer case shift knob for a '78 40. Thanks, Mike

 

[Diescipel]

WTB: 40 Doors 75-84, 1/2 Doors, windshield mount mirrors, bikini top, rear emblems

I have a 1983 BJ42. Emblems would be 1/79 and later. Also, an instrument cluster (actually, just the guage face and odometer) with a 6 digit odometer in miles if they exist.


B

 

[DIESEL40]

Mike,
There is a yard close by that may have one. I will check for you. Also, I've got a 2f for ya for $75 if nothing else works out!
Talk to you later,
Mark

 

[Diescipel]

Will this work?

B

 

[tnt40]

Oh, I forgot. give me your zip code. I would say no more than $15.

 

[TX_TLC]

This is true C.C. He is talented...

 

[rolledb4]

3..........

1....................

 

[customcruiser]

NC - 28117

let me do some reseach on the 2 and will get back to you...

 

[zornff]

Yep, thats it. Thanks, i did'nt mean for you to do all the work, but appreciated. MIKE

 

[G_Stratton]

Hope this helps

I used the shifter from my 3 speed. It was an exact fit to the SM420 I put in.

Guy

 

[Diescipel]

BJ70 parts vehicle in Edmonton

Also check www.gscruiserparts.com

Or check Canuck classifieds for rusted out BJ60s as full donor vehicles. Pick up an H55F tranny while you're at it and you won't be dissappointed. I don't think the 3Bs were ever mated to a 3 spd., so your bell housing requirement may be in earnest.

HTH

B

 

[too tall]

I have one from a 71 if you are still looking?

 

[too tall]

There are always a couple in the local buy & sell here in vancouver .They usually go for about 12-15 hundred cdn.Try buy&sell.com vancouver I know there is one in this weeks issue.