Wanted FJ60 Manual (40 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

FJ40 Hood

Does anybody have a steel hood for a `78 cruiser-I can buy or trade-I have a motor,tranny,Full heating system, original wire harness,original tube spare tire holder with original spare(no rust) and a softtop.
 
Small FJ40 Parts Needed

This stuff may sound ridiculous,but I need these small items becuse they were lost,damaged, or beyond repair on my rebuild.

Left-side heater hose to side-window defroster.(The large hose that attaches to heater).

one each, plastic plug for side-window defroster (no kidding).

Transfer case shift knob.

O.E.M-style boots and trim for both shifters.
 
Re:York A/C compressor

Junk Yard.
The tech articles have guidelines as to what trucks have them.
I got mine from a guy in my club for free. (Thanks Dan!)
 
Re:FJ40 Hood

I have 78 fj40 hood sitting here in Southern Illinois; I may be willing to trade. Let me know if this is do able, I am not sure where you are located. Email me at siulumberjack@aol.com I check that frequently.

Thanks Dave
 
13BT EXHAUST MANIFOLD

LOOKING FOR A 13BT EXHAUST MANIFOLD.I HEAR THEY WILL BOLT UP TO A 3B ENGINE BLOCK.THIS WILL SAVE ME THE TROUBLE OF MODIFYING MY MANIFOLD FOR MY SUPRA 26T TURBO.
 
Re:Hard Top Wanted:

I have a hardtop off my 71 here in Houston, lift-up hatch and all. Its in decent shape. Original red paint, with some touchups w/ rust primer. Shoot me an email..
 
Re:soft doors

Are they from a besttop? Could you send me pics? My email is Loudguy@excite.com. Thanks for the reply.
 
Re:Hard Top Wanted:

Dogfinder,

I'm a Houstonian as well and looking for a hardtop in good shape. Do you have any pics? What are you wanting for it? Will it fit a 78 without modification? I've got a orig. soft top version with a tail gate so I'm thinking it may fit. If the guy in LA doesn't take it, please let me know. Thanks.
 
Re:3F crank needed

I have a crank. It has less than 5K miles. It is from an engine rebuilt by Man-a-free.

DIGIT
 
Help! I need brake line fittings...

:mad:

Anyone know where I can get the 8mm fitting for my brake system on my 1970 FJ40? They're a 10mm nut, but the thread is 8mm and all the other years seem to be 10mm...correct me if I'm wrong, and sell me some or tell me where to get them if you can!!!

Tom IV
 
Re:Need differential with 370 gears for a 1980 FJ40.

Cruiserhead. you may be in super luck. i'm getting ready to swap out my 3.70's from my 82 fj40 for some old 4.10 to put in. i'll have the whole 3rd member. i may not have them as quick as possible but tell me. i really will want to sell them. say 275-350 for both. it may take 2-3wks though
but they only have 100k miles.
 
Re:Need differential with 370 gears for a 1980 FJ40.

;)Sounds good. What is your zip code so I can check on shipping.I have a good 410 that I`m running now if you need it,we could swap 1 for 1 and $150 for the other.It`s out of a front but can also be used in the rear.E-mail me at: fj40s@att.net
Thanks David
 
Re:Need differential with 370 gears for a 1980 FJ40.

sounds good. it will take a few weeks to get them. i have 2 410....i'll email you...at school now. gtg
 
Re:Roll Bar

I have two in Kansas. One oem and one aftermarket (supposed to be stronger than stock. Both in good condition with a few scraps etc. Email me if interested. Name a fair price and we will go from there. I can ship via forwardair.com or Fedex freight. Just let me know. Thanks.
 
You must log in or register to reply here.

Similar threads

flem0061
For Sale Haynes Manual 1980-1996
Replies
2
Views
400
cts
C
N
Wanted Manual front seat 80 series
Replies
0
Views
251
NeedNCtoy
N
dr_dobro
For Sale FJ60 FJ62 Manual Chrome Door mirrors
Replies
0
Views
431
dr_dobro
dr_dobro
65swb45
SOLD SoCal: 1988 Factory Repair Manual
Replies
5
Views
577
Yotajeff
Yotajeff

Users who are viewing this thread

Total: 41 (members: 0, guests: 41)

Share this page

Back
Top Bottom