Wanted FJ60 Manual (42 Viewers)

[Isotel]

I have a 72 housing (same as the latter ones, comes with minitruck knuckles, and alot of the brake parts.. you would need hubs, Birfs and inner axels.. bolts and stuff and a 3rd.. but all im looking for is about $125 plus shipping from CO

 

[x-unimog404]

I have a set off a 72 and 74 let me know.

If they are in good shape, work, and are not broken or cracked, I am interested.
I sent you a pm a few days ago.
Get back to me.
videorob@earthlink.net

 

[Landpimp]

1958-9/73
9/73-1/79
and
1/79-1984

might be spendier than I thought, the early one was $20 but the latter ones look to be 3x's that!

I'm in need of a 1978

What year did they change ?

 

[72cruiser]

yeah, the one with the enamel on the inside of the letters is quite a bit steeper


malphrus

 

[Dianna]

78-80 Distributor and Igniter wanted

Anyone have a 78-80 distributor and igniter? I'm located in Ohio. Thanks!

Dianna

 

[accasbel]

THREAD NO LONGER NEEDED - Can be Deleted

I have acquired the trim - thanks Phil!.

Original Title & Message

WANTED: 1988 FJ62 Lower Passenger Trim

I have an 88 FJ62 that needs the lower passenger side trim piece that runs along the rocker panel under the doors.

Does anyone have any trim pieces that need a home?

Thanks, Lee

 

[dd113]

I got them. Hit me direct tardwrangler@urbanlandcruisers.com

 

[LandCruiserPhil]

Lee I have one from a 60 ......are they the same?

Phil

 

[Bradass80]

Fj-40 Tub

I still need a tub for a 78 Fj-40, as close to Colorado as possible, Aluminum or steel works, Thanks Brad.

 

[accasbel]

Don't Know / Hope So...

Are you going to the Sonic Friday night?? Maybe we could compare the trim there. Thanks, Lee

 

[phishtaco]

FZJ80 Center Caps

Need at least 2.
Thanks.

 

[LandCruiserPhil]

Are you going to the Sonic Friday night?? Maybe we could compare the trim there. Thanks, Lee

90% sure ...........Ill bring it

Phil

 

[LandCruiserPhil]

I found one ...Thanks to all

 

[Stickboy]

FJ62 Passenger Grab Bar

Looking for a 62 grab bar on the passenger side. Grey interior to install in my 86 FJ60.

I'm in Moscow, Idaho, 83843.

thanks,
mike

 

[Officer Friendly]

In Need of a 1979 FJ40 Wireing Harness

I am in need of a 1979 factory wireing harness, I was a idiot and had a 18 curcit Painless installed by a moron guy and now it is all FUBAR. Can anyone help?
Thanks
Chris

 

[clownmidget]

I've got three from a 97 I don't need/want. PM me an offer, location, etc. I'm in Riverside, CA
Mike

 

[clownmidget]

80 series DS headlamp 1995-97

Anoyone have the driver's side headlamp assembly for a 1995-97 80 series. I've contacted Dan so I know what Toyota wants for them, just want to see if anyone has a used one they are willing to part with. Thanks in advance.
Mike R.

 

[ace10]

tough item to find used. i tracked down two of them and each had broken mounting tabs.

i think that i saw one on ebay the other day... it had two holes in the glass.

i ended up going new, mailorder from a dealer in NC.

good luck!

 

[Sloan]

Marv at Spectre Off ROad usually has a few of those lying around.

 

[3_puppies]

I've got one from a 77 made in Nov. 76 not sure how close it would be.