This is the cheapest running and driving fj40, i priced it to move it so I can get my daily fixed. Will take cash off if you have a nv4500 with t case or a sm465 with a np205
Asking 3500 for mud members.
Located in bend oregon
craigslist add here 1970s fj40
.
So before anything
She runs, she drives, She is street legal, And the title is clear but LOST. I have all the paperwork but no money for the title replacement(switching jobs and between paychecks)
This is a street legal no frills wheeling truck. Anything extra that isnt necessary to running and driving has not been worked on. This is my rez runner, wheeling truck, sand monster, backroads driving, play truck. It is a good straight clean truck from Cali that my family has had for years alot of time and money has gone into it for the past 40 or so years.
this is my uncles old fj40. I have a small build thread i started back when she had issues, they where resolved and I dailyed the truck till my dmv wouldn't give me anymore trip permits. My uncle lost the title however he gave me all the signitures for a new one.
Now onto the goodies
No rust in the floors
Advance adapters sbc bellhousing
Advance adapters sbc motor mounts
Centerforce "racing clutch"
4 speed cruiser trans swap
Chevy power brake booster
Front discs
Custom made bigger gas tank under the rear deck
Unsintalled Custom swingout tire carrier(I'll knock 250 off if you dont want it)
Reapposltered chevy captains chairs from my old/wrecked 87 diesel suburban
Optional 90's caprice Center console
Newer relay box with fuses uninstalled
Custom bumpers for approach angle
Sbc has msd distributer, edlebrock intake, edlebrock carb, and corvette ram horns to flowmaster 40s that dump under the doors. Has had work done in the past. I installed a thumper cam years ago
She has a kayline soft top
Soft half doors and soft full doors
And a Custom tailgate
Spare hood
Spare diff
Spare emblems
Now negatives
Is under jetted for the motor, it will outrun the carb and stall out if you slam it to wot and hold it. Cruise and it will go all day
I am throwing in a carter that needs a rebuild
Was flipped back in the day, it destroyrd the hard top and the windshield frame and bent the front fender. Frame and tub where checked and are not bent
Replaced the windshield frame but not the windshield, its just a sheet of lexan(refer to the wheeler title)
Two holes cut in the floor for the h brace welded to the roll bar that saved my uncles life
3 matching spare wheels the 4th is gone sadly
The tach in the photos is gone. None of the factory gauges are hooked up, though I have them.
the electrical needed a overhaul and we never bothered with hooking them up. The set that matters(temp, oil psi, and volts) are after market and hooked up
No heater(aftermarket one is included)
Asking 3500 for mud members.
Located in bend oregon
craigslist add here 1970s fj40
.
So before anything
She runs, she drives, She is street legal, And the title is clear but LOST. I have all the paperwork but no money for the title replacement(switching jobs and between paychecks)
This is a street legal no frills wheeling truck. Anything extra that isnt necessary to running and driving has not been worked on. This is my rez runner, wheeling truck, sand monster, backroads driving, play truck. It is a good straight clean truck from Cali that my family has had for years alot of time and money has gone into it for the past 40 or so years.
this is my uncles old fj40. I have a small build thread i started back when she had issues, they where resolved and I dailyed the truck till my dmv wouldn't give me anymore trip permits. My uncle lost the title however he gave me all the signitures for a new one.
Now onto the goodies
No rust in the floors
Advance adapters sbc bellhousing
Advance adapters sbc motor mounts
Centerforce "racing clutch"
4 speed cruiser trans swap
Chevy power brake booster
Front discs
Custom made bigger gas tank under the rear deck
Unsintalled Custom swingout tire carrier(I'll knock 250 off if you dont want it)
Reapposltered chevy captains chairs from my old/wrecked 87 diesel suburban
Optional 90's caprice Center console
Newer relay box with fuses uninstalled
Custom bumpers for approach angle
Sbc has msd distributer, edlebrock intake, edlebrock carb, and corvette ram horns to flowmaster 40s that dump under the doors. Has had work done in the past. I installed a thumper cam years ago
She has a kayline soft top
Soft half doors and soft full doors
And a Custom tailgate
Spare hood
Spare diff
Spare emblems
Now negatives
Is under jetted for the motor, it will outrun the carb and stall out if you slam it to wot and hold it. Cruise and it will go all day
I am throwing in a carter that needs a rebuild
Was flipped back in the day, it destroyrd the hard top and the windshield frame and bent the front fender. Frame and tub where checked and are not bent
Replaced the windshield frame but not the windshield, its just a sheet of lexan(refer to the wheeler title)
Two holes cut in the floor for the h brace welded to the roll bar that saved my uncles life
3 matching spare wheels the 4th is gone sadly
The tach in the photos is gone. None of the factory gauges are hooked up, though I have them.
the electrical needed a overhaul and we never bothered with hooking them up. The set that matters(temp, oil psi, and volts) are after market and hooked up
No heater(aftermarket one is included)
