FJ40 & FJ60 Alternator Restorations (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Here’s one for @Godwin :

28294085-5155-484A-94A2-F3261DCCFF10.jpeg
 
DSCN0770.JPG
DSCN0771.JPG
 
Last edited:
Wow. 💖
 
Few more, fresh from the spa:

FJ60 with a new Toyota voltage regulator (I try to keep a few of these on hand for customers that want the ultimate 60 alternator resto), an FJ40 27020-60070, and one of the big Denso 2F starters:

DD50B444-0554-45F7-9936-210E02102B5E.jpeg
 
Here’s some more pics of Matt’s NOS big boi with a normal sized unit for comparison:

ACDD7CF9-8E4C-4DFA-93C1-175DEA79DEEB.jpeg


7BDDF91F-3F2F-4C0B-84EA-B33798B62293.jpeg


And that super cool riveted data plate:

AA400985-8171-4FF3-8E77-94647D08408D.jpeg
 
I was not going to ask, but ok I will :). What paint do you use that replicates that Toyota/Denso look on the outer case?

I understand if it's something you don't want to share. I am looking to coat things like intake manifolds, resistors, injector controller etc, but nothing I have tried (2k or out of a can) seems to match that nice cast dark silver look.
 
I was not going to ask, but ok I will :). What paint do you use that replicates that Toyota/Denso look on the outer case?

I understand if it's something you don't want to share. I am looking to coat things like intake manifolds, resistors, injector controller etc, but nothing I have tried (2k or out of a can) seems to match that nice cast dark silver look.

That is the aluminum after media blasting. I’m not sure there’s a coating that will replicate it.
 

Users who are viewing this thread

Back
Top Bottom