FJ40 Center Consoles

[NikP]

Follow one of the links below for ordering.


Click this link to order one shipped within the US:

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BCBJDJMF8RBBL



Click this link to order for local pickup in Edmond, OK.

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=CU7UUY7E49MJA

i'll take one . just let me know when you need payment

 

[Maxdaddy]

let me know when you get one for a 62 series made. It would be nice if it was taller so you could rest your arm on it. The facotry console is so small. I have the console out of my 62 I can swing it buy it you need something to pattern it after. The 62s are all automatic, so the console for a 60 and 62 are different I think. Or atleast a 60 ccot console won't fit a 62 from what i hear. Love the look of what your building.

 

[NikP]

I've added a few pictures of the insides since some have requested.

 

[NikP]

And this gives you and idea how I installed it. Keep in mind, I have non-stock seats so you rear mount may be different. I used the stock front mounting bolt holes.

 

[patride71]

Thanks for posting the pics of the interior and the bolt on set up.

I'm still interested...looks like you have some orders already.

What is the expected turnaround time on an order completion at this point?

 

[NikP]

I've had lots of interest but I guess money talks and the actual orders have been few.

I'd expect turn around to be about 2-weeks; that gives me time for family on the weekends. It could be less.


Nik

Thanks for posting the pics of the interior and the bolt on set up.

I'm still interested...looks like you have some orders already.

What is the expected turnaround time on an order completion at this point?

 

[Maxdaddy]

Nik, so your opposed to building a 62 console?

 

[NikP]

Yes (at this time), since I don't have anyway to verify measurements and make sure of fit.

Honestly, after all the initial interest when it has come to actual orders, I haven't seen enough to cover materials for building consoles.

If I had a bit more interest in the 40 consoles, I'd be willing to venture out to experiment with others like your 62.

Nik

Nik, so your opposed to building a 62 console?

 

[patride71]

I've had lots of interest but I guess money talks and the actual orders have been few.

I'd expect turn around to be about 2-weeks; that gives me time for family on the weekends. It could be less.


Nik

Works for me...I'm sending you a PM with an additional question.

 

[JeffJ60]

Did you get your measurements on the 60? Will it be bolt-in like the CCOT version? If so, I am in.
Would MUCH rather support an innovate mudder than a company!

Nice work Nik.

 

[landtank]

I just bought a 40 and am really interested in a console from you, however, I need a little time to allocate the funds. Hopefully you are still offering them when I'm ready.

I know all to well the situation you are in, it looks like a great piece and I would suggest you hang in there.

 

[NikP]

No response on measurements for the 60 console. If I had a detailed picture with measurements for the mounting spots, and measurements for overall length, width and height, I could get a better idea.

Same for the 62 if someone has them.

If someone has one laying around, please take a few measurements and post some pictures.

Did you get your measurements on the 60? Will it be bolt-in like the CCOT version? If so, I am in.
Would MUCH rather support an innovate mudder than a company!

Nice work Nik.

 

[patride71]

Paypal sent

Thanks Nik!

 

[Combat Chuck]

If you're up to it in a month, I would definitely have shaken the money-tree adequately.

 

[Maxdaddy]

I have a 62 console sitting in my garage. Ill take some measurements and snap some photos.

 

[Mace]

No response on measurements for the 60 console. If I had a detailed picture with measurements for the mounting spots, and measurements for overall length, width and height, I could get a better idea.

Same for the 62 if someone has them.

If someone has one laying around, please take a few measurements and post some pictures.

I'll get you pictures and measurments this afternoon.

 

[Beams37]

I could send you my 60 console. Would that help? I'm very interested in this project.

 

[patride71]

Bump....loosen up the purse strings folks.

If Nik doesn't get more sales, then this won't get off the ground and I won't get mine!!!

 

[red87runnerATX]

If you're willing to build a version for first generation 4runners, I could pay you tomorrow!

Going out on a limb here, but I don't suppose you have a 4runner in the driveway to mock it up?
Great looking console by the way!

 

[RunTrout]

Interested for a 60.
I can get you measurements if you haven't received any yet.