- Thread starter
- #41
Finally Added some trail damage... O well par for the course.
Double E GX460 Build Thread (1 Viewer)
- Thread starter doublee901
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Finally Added some trail damage... O well par for the course.
r2m
Richard
Guess the sliders were not wide enough catch that tree/rock... Bummer. As I tell my friends, I don't mind trail striping or even scratched/dinged rims or bumpers (since they're steel), but I will not tolerate buckled body panels.
I just got a door ding the other day getting gas, and I'm going to get that fixed ASAP!
Again, sorry to see any GX with dents.
I just got a door ding the other day getting gas, and I'm going to get that fixed ASAP!
Again, sorry to see any GX with dents.
- Thread starter
- #43
No worries, I am fortunate to have a good friend who is also one of the top dent guys in town. Should have that fixed up in no time.Guess the sliders were not wide enough catch that tree/rock... Bummer. As I tell my friends, I don't mind trail striping or even scratched/dinged rims or bumpers (since they're steel), but I will not tolerate buckled body panels.
I just got a door ding the other day getting gas, and I'm going to get that fixed ASAP!
Again, sorry to see any GX with dents.
- Thread starter
- #44
Got my front skid installed. this one is steel, the remaining skids I will most likely purchase in aluminum
re_guderian
SILVER Star
There's a thread on here with some thrashed RCI aluminum skids. I went full steel RCI, all the way back. I think front of gas tank is about the breakover point. Sorry about the dent.
edit: here you go, (steel, cough, cough...) RCI Skid Plate GX 460 - Weights & Experiences...Alu & Steel - https://forum.ih8mud.com/threads/rci-skid-plate-gx-460-weights-experiences-alu-steel.1238480/#post-13599382
- Thread starter
- #46
That is the thread that convinced me to do the front skid in steel. However, I think past that main impact point the rest of the skids would be just fine in aluminum.
- Thread starter
- #47
Prinsu rack installed, only broke two bolts and they were easily extracted. Thankful they sent extra hardware.
Shipped in about 3 business days even though the lead time said 2 weeks
r2m
Richard
You shouldn't be eating your spinach before wrenching bolts!
- Thread starter
- #50
Finally made up a table for rear door.
Should do just fine.
Should do just fine.
- Thread starter
- #51
And is it considered a RTT if my tent is on the roof in a bag? (asking for a friend)
And mocking up solar panel placement. T-slot hardware will be here on monday.
And mocking up solar panel placement. T-slot hardware will be here on monday.
r2m
Richard
Love the mud!! 
Best mod yet!
Best mod yet!- Thread starter
- #53
Ran the wires down left side of the rear and into the car via the taillight wiring grommet
- Thread starter
- #54
The solar panels from the front kind of look like eyebrows so my buddy sent me this photo
And I did the front bumper cut
I took pictures along the way if anyone wants more on the bumper cut
And I did the front bumper cut
I took pictures along the way if anyone wants more on the bumper cut
- Thread starter
- #55
- Thread starter
- #56
Built a fridge slide with tilt. need to add some gas struts and she will be finished
r2m
Richard
Great idea especially with my wife who top's the scale at 5'1". She has to climb up to look into our large 85 qt fridge.
- Thread starter
- #59
Finally got out into the west. This Utah near porcupine rim
Beautiful beast. I love mine and can’t wait to encounter more hair raising situations with you! Balls to the wall 
