Dome light cover (7 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Outsane

Supporting Vendor
Joined
Oct 1, 2010
Threads
81
Messages
2,826
Location
San Mateo, CA
Website
solvefunction.com
@ofer bruhis gave me one to model from.

So now replacement dome light overs are available.

IMG_20250729_204335.webp
IMG_20250729_204335 (1).webp


If there is anything else you think I should make let me know.

 
Pretty sure it replaces that crustyness

Sure it fits but not corrected for most markets from 10/81 on. Those worked off the door as well as the switch. Believe the perimeter where it attaches to the base is the same but cover itself is different. Can see how the face angles in at the bottom where the script is.
20220822_132125.webp
 
Sure it fits but not corrected for most markets from 10/81 on. Those worked off the door as well as the switch. Believe the perimeter where it attaches to the base is the same but cover itself is different. Can see how the face angles in at the bottom where the script is.
View attachment 3961318
Send it to me and I'll happily make one
 
What’s the difference between this and the one that’s still available from Toyota ?
 
What’s the difference between this and the one that’s still available from Toyota ?
I thought it wasn't available any more... please hold until Toyota stops making them
 
I'd be interested in this as well. I was going to take a stab at it but I don't have measurements so was going to base it off of photos for a start. Was thinking Nylon for starters.

EDIT: Does the dome light cover you're offering have the "door off on" printed on it?
 
I'd be interested in this as well. I was going to take a stab at it but I don't have measurements so was going to base it off of photos for a start. Was thinking Nylon for starters.

EDIT: Does the dome light cover you're offering have the "door off on" printed on it?
Nope no text on the light
 
Oh cool stuff!
There's a few versions of lights and their STLs in the print thread as well - early dome as well as this mid-style too.

For those without a printer, $10 is a reasonable snag, though. I think Toyota only sells the cover and base together, was $50ish if I recall, which was why I modeled one up at the time.

3D Print and CAD File Repository - 40 Series - https://forum.ih8mud.com/threads/3d-print-and-cad-file-repository-40-series.1281295/post-14435722
Oh cool stuff! All kinds of good things in there!
 
I thought it wasn't available any more... please hold until Toyota stops making them

The lens (81241-90300) is NLA from Toyota. The pre-07/80 light assembly is avail from Toyota, 81240-90300. MSRP is $72.50 so a lens @ $9.00 is perfect for many needs. I need to order a few for my personal projects. Well done!
 

Users who are viewing this thread

Back
Top Bottom