Digital Clock replacement (3 Viewers)

[Guyute]

Want to confirm.... the bracket fits both RHD and LHD rigs? It's all switcheroo layout on the RHD.

 

[Outsane]

@Guyute The left and right sides of the mount are slightly different. I can mirror the print for RHD. 95% sure it will fit.

If not I can always make adjustments

 

[Guyute]

Okay. Yeah looked like it slightly overlaps more on one side. I don't have a RHD dash piece to send you, but I'll give the mirrored one for RHD a go in my rig and let you know on the fit.

 

[FJBen]

I made a clock replacement for the 70 series.

This adds a
GPS speedometer
Time, date
Altimeter
Voltage
And lots of other features
Only needs to be connected to power that used to go to the clock.View attachment 3944662View attachment 3944663View attachment 3944661

70 Series Landcruiser digital Clock replacement

70 Series Landcruiser digital Clock replacement Clock replacement screen with data for different Toyota Vehicles You can wire directly into the clock plug with spade connectors. Replacement kit to add some GPS fed data to your vehicle. Screens can be switched from Level Meter, GPS location with...

solvefunction.com

So is there anyway to add external input for say like EGT/boost/coolant temp info?

I mean it’s pretty awesome as is, just curious.

 

[Outsane]

So is there anyway to add external input for say like EGT/boost/coolant temp info?

I mean it’s pretty awesome as is, just curious.

That's a whole different project I have been tinkering with. Programming is not my strong suit.

 

[FJBen]

That's a whole different project I have been tinkering with. Programming is not my strong suit.

That makes sense. I currently run auber gauges but would rather swap to 1 gauge with a screen like this.

There is a company in Poland that makes a product like that that does all the programming and inputs, than you can output to a different screen/setup.

 

[96TrailSurfer]

I had mine ready to go, but reversed polarity and blew the C5 capacitor.

Can anyone post a pic of C5 with specs so I know what to replace it with?

 

[96TrailSurfer]

So is there anyway to add external input for say like EGT/boost/coolant temp info?

I mean it’s pretty awesome as is, just curious.

I've been working on an Arduino-based solution for that off and on for a year or 2... it's not complicated per se, just never have enough time to actually put in a solid 1-2 weeks to get it done.

 

[Outsane]

 

[Outsane]

I had mine ready to go, but reversed polarity and blew the C5 capacitor.

Can anyone post a pic of C5 with specs so I know what to replace it with?

 

[96TrailSurfer]

47
47 uF 35V, right?

 

[Outsane]

47

47 uF 35V, right?

Looks like it to me, but I am a Mechanical clicker, not electrical tongue tester