current source for dash grab bar (FZJ)?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

You just need to look deeper at the year range...the square is for '95-'97's.

I agree that they look cooler on the earlier dash with the angle to the pad, not just a "gotta get off the toilet somehow" looking square bar sticking out. That said, you have what you have, so go with it. Either one is quite functional as a grab bar, and perfect for my RAM mount to hold my tablet too.

Held up great for 3 days at Fall Crawl (heavy rock crawling/thrashing) and a New Year's day trip that wasn't as rough.

View attachment 3807282

View attachment 3807283
I see you are rocking TOYOBD1👍
 
I see you are rocking TOYOBD1👍
Yeah, now I just need to rock that OBD1 Turbo! Pumped to see how yours is coming...any hints at fueling yet?

And to the OG topic, don't worry, I doubt if there will be a re-release of this part...fantastic that you actually found a brown one!
 
yeah I suspect the earlier dash is easier? - definitely easier to find those handles than the square-dash variant!
The write up is for 95+. No mentioned of airbag in the instructions. I used his write up to install mine. Did mine in 40min. The removal of the glove compartment was 5min...the rest of the time was to measure and re-measure multiple times....
Pretty 🍌 🍌 job
 
Just fishing, but Keith, you're a fabricator. What about doing a brushed SS version that looks like a handicap rail, but fits in the exact same way as a factory bar?

Would there be a market?

Mandrel bent SS premade and cut to size, weld in a plate and a stud on each end, provide a hardware kit and done.
 
Yeah, now I just need to rock that OBD1 Turbo! Pumped to see how yours is coming...any hints at fueling yet?

And to the OG topic, don't worry, I doubt if there will be a re-release of this part...fantastic that you actually found a brown one!
Sorry to hijack @eimkeith .....

The stand alone ECU is being re-mapped right now. This is their 1st OBD1 Turbo kit (stage 1) and with this development they will bring into the market with, they are making sure it's 100% functioning. With that being said no ETA but by Q1 of 2025 is what Johnny said.
Of course that is the stage 1 version but I'm going all in with stage 2....so again product development phase 2 no ETA.
Big fuel kit
Big injectors
Intercooler
14psi
 
Just fishing, but Keith, you're a fabricator. What about doing a brushed SS version that looks like a handicap rail, but fits in the exact same way as a factory bar?

Would there be a market?

Mandrel bent SS premade and cut to size, weld in a plate and a stud on each end, provide a hardware kit and done.
man, that kinda sounds like it needs a urinal next to it?? (sorry just came back from the pub adjacent to the shop, so that's the most recent memory)
 
Sorry to hijack @eimkeith .....

The stand alone ECU is being re-mapped right now. This is their 1st OBD1 Turbo kit (stage 1) and with this development they will bring into the market with, they are making sure it's 100% functioning. With that being said no ETA but by Q1 of 2025 is what Johnny said.
Of course that is the stage 1 version but I'm going all in with stage 2....so again product development phase 2 no ETA.
Big fuel kit
Big injectors
Intercooler
14psi
hijack away - I'm hanging out for this convo
 
Cruisers and Co are still running their Turbo sale. 10% off till Jan 31st
 

Users who are viewing this thread

Back
Top Bottom