Crank Pulley or belts? (1 Viewer)

[SergP]

I just find out what V-belt not fit in the crank pulley.

Questions:
Can I flip this pulley or Do I need a new one with equal grooves?
Can I do two beets set up ..
1-crank pulley to water pump
2- water pump to alternator?

Can I used a thin belt ?

If I use the second groove.. it looks bad

 

[SergP]

PO set up....

I guess V-belt can go to air pump?
but what belt connect alternator and c-pulley?

 

[Mark Jennings]

Move you alternator to the other side of the mounting bracket...line up the balancer wide grove to the water pump and alternator. The narrow grove goes to the air pump.

 

[SergP]

Move you alternator to the other side of the mounting bracket...line up the balancer wide grove to the water pump and alternator. The narrow grove goes to the air pump.

Do you mean this?

 

[Mark Jennings]

Yep...that’s what I mean. Look as picture above with the yellow and red spaghetti....what side of the bracket is it on...then look at your picture.

 

[Mark Jennings]

Here’s something I wrote a while back...may help you out.

AC and Power Steering Pre 1969 FJ40

Restoration of a 1968 Land Cruiser Adding Vintage AC....AND....Power Steering to your Pre 1969 Land Cruiser. As most of you know, pre 69 FJ40’s with an F engine used a press on harmonic balancer with the vast majority having only a single belt groove for the accessory drive, e.g. just the...

forum.ih8mud.com

 

[SergP]

Here’s something I wrote a while back...may help you out.

AC and Power Steering Pre 1969 FJ40

Restoration of a 1968 Land Cruiser Adding Vintage AC....AND....Power Steering to your Pre 1969 Land Cruiser. As most of you know, pre 69 FJ40’s with an F engine used a press on harmonic balancer with the vast majority having only a single belt groove for the accessory drive, e.g. just the...

forum.ih8mud.com

It works ! Thank you SO much!

 

[Mark Jennings]

Your Welcome!