Clutch pedal in an 80

[itbrokeagain]

Picking up my new drive train. I need a clutch pedal for the sm465. How are you guys doing this in an 80?

 

[mr jits]

Picking up my new drive train. I need a clutch pedal for the sm465. How are you guys doing this in an 80?

I'm pretty sure the 80 series firewall has provisions for the clutch and mounting. The 80 series clutch is hydraulic, so making it work with the SM465 is pretty doable. I'd source an oem 80 series clutch assembly (hit up @beno ) including the master cylinder assembly, and go from there.

 

[mtntoys]

LX450 1HZ Turbo Diesel & 5speed swap

 

[Tapage]

your best bet ..

 

[pocholin]

I better go with nv4500

 

[GLTHFJ60]

Factory clutch pedals can be found on ebay sometimes.

 

[itbrokeagain]

I'm sorry guys. Don't know how I missed all of this. Thanks for all the info

 

[Dirty Koala]

I put in the euro market LHD 80 series clutch pedal and smaller brake pedal with the matching 80 series master cylinder.

I beleive the brake pedal is not longer available new, others have had to cut, bend and weld their stop brake pedal to solve that issue.

Depending on the size of your slave cylinder you may end up needing to use a different master to keep the master/slave matched...if so, you can fairly easily make mounting plate to attach a master to the clutch bucket.

 

[Pskhaat]

Bump. Looking for full clutch pedal assembly and cylinder for my 80. Possible to source anywhere anymore?

 

[EWheeler]

Bump. Looking for full clutch pedal assembly and cylinder for my 80. Possible to source anywhere anymore?

One in the classifiedsss

For Sale - Seattle area. LHD 80 series clutch pedal.

LHD 80 series clutch pedal. Ended up with an extra one. $350.

forum.ih8mud.com