-
-
pocholin replied to the thread tundra 10,5 axle on a land cruiser 80 series.Well ita done ... now.. need to measure axleshaft to make it.... -
-
pocholin replied to the thread 80 Series Underdrive high range gears and 3:1 low range gears.hello, this is a old treat but .... I have problem instaling this gears in a HF2A fron a lc105 ... I already chance the imput shaft ... but when I close the case... the shaft doesnt aline... do I need force it.... I dont thinks... I have 3 day...
-
pocholin replied to the thread tundra 10,5 axle on a land cruiser 80 series.Need work a lot on the latle, the inside diameter of the OEM housing tube, is Way to big for the ruff stuff spindler, so need to re-size the spindle, the hubs need to re-drill the lug to acomodate 12mm lug
-
pocholin replied to the thread tundra 10,5 axle on a land cruiser 80 series.Nice Im using OEM axle housing.. i bougth spindle and hub from ruffstuff for 14bolts 6 lug , cutting 3/4 inch wider each side from stock 80 ..
-
-
pocholin replied to the thread Brembo 17z caliper 350mm rotors on my land cruiser axle.its plug and play... and the pedal sansation is less smushy
-
pocholin replied to the thread Write-up: Toss the LSPV and install a manual proportioning valve.good post... I delete de LSPV valve.. but didnt delete the return line to the front caliper.. to keep the pedal feel the same... the first time I delete the return line .. and was hard to tune the manual proportional valve... then I re instal...
-
pocholin reacted to deadlew's post in the thread tundra 10,5 axle on a land cruiser 80 series with
Like.
More progress on test fitting parts, RD146 with Dana 60 side gears. My friend loaned me a front inner Dana 60 axle shaft. Fit well. Time to get the diffs set up and measure for shafts. Dana 60, 35 spline, front inner axle fits like a glove... -
pocholin replied to the thread tundra 10,5 axle on a land cruiser 80 series.this is the best news I have.. its much better to change the spider gear ..., what did you used. I bought the spline and hub from ruffstuff to for my rear convertion
-
pocholin reacted to deadlew's post in the thread tundra 10,5 axle on a land cruiser 80 series with Like.
ARB p/n 728K041 (Dana 60 35 spline spider gear set) will fit into RD146. I have a Ruff Stuff housing, with 14 bolt spindles and 6 lug hubs that I'm building. PaulC
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
