Thread from the dead but I wanted to log my measurement on my LX450 (1997) hub bore since theres plenty of back n forth on this between 106 or 108.
It IS 108mm.
It IS 108mm.
Center bore diameter of a fzj80 (2 Viewers)
- Thread starter Juan Munoz
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Road Apple
SILVER Star
FZJ 80 Wheel Specs
Bolt pattern 6 x 5.5”, 6 x 139.7mm
Stock backspacing is 4.5”
Stock Offset is 0”
Center bore is 106mm
PCD is 139.7 (stud)
Stock is 16”x 8” with Offset of 0mm
Bolt pattern 6 x 5.5”, 6 x 139.7mm
Stock backspacing is 4.5”
Stock Offset is 0”
Center bore is 106mm
PCD is 139.7 (stud)
Stock is 16”x 8” with Offset of 0mm
Just here to prove someone wrong....I have a 1993 triple locked and ordered 106mm rims and they didn't fit. They had to be bored to 108 to fit. Guess that means everyone acting like you're an idiot for asking if it's 106 or 108 are actually wrong. Not all are 106.
COYS
SILVER Star
Yours must b special
COYS
SILVER Star
Thread from the dead but I wanted to log my measurement on my LX450 (1997) hub bore since theres plenty of back n forth on this between 106 or 108.
It IS 108mm.
I hope you’re not a surgeon
Hub Bore: Ø4.19 in [106.4 mm]
