Cape Fear Electronics (5 Viewers)

[mattressking]

Great work, fellas like you are few and far between! Now I know who to send anything electrical to when it is out of my realm.

 

[Engineer8000]

I repaired this original speaker by replacing the cone.

 

[Engineer8000]

 

[Engineer8000]

I figured this out over the last few weeks for a very patient person.

VW Westfalia idle stabilizer valve controller. So if you have a Westy with a bad idle stabilizer controller, I can help you out.

 

[Engineer8000]

finished testing these today, 81+ emissions computers

 

[Engineer8000]

Its time to get your AC going. $60 to repair and test an AC Amplifier.

 

[Engineer8000]

Working on this for a friend

 

[Tswaff]

View attachment 3403528



I have service manuals for all of the radios used in the 70s and 80s Toyota cars and trucks. I stock the common repair parts.


If you have any other old electronics needing repaired, lets talk.

Russ Cusick
President, Cape Fear Electronics LLC

I would like to send you an OEM radio from a ‘78 40. Do you still work on them?

 

[Tswaff]

I see a few radios for sale on fleebay now advertised to be for the FJ40. They are not. All FJ40 radios had the control pegs low and inside like this. And they were all AM only. If the pegs are centered vertically then it is not an FJ40 radio.

View attachment 3380293

I have one I want to send to you to clean up and service to get it working again.

 

[Engineer8000]

Yes, familiar with that one

 

[ToyotaMatt]

I have one I want to send to you to clean up and service to get it working again.

View attachment 3592997

View attachment 3592998

Yes, familiar with that one

View attachment 3593034

.



He was familiar with mine last Easter too ....




NPR still comes in strong each morning too , i simply love all the TECH. on National Public Radio ....

thanks mr Russ 8000 for tuning my tuner pegs & adjusting my antenna adjuster too .....


.

matt

.

 

[Tswaff]

.



He was familiar with mine last Easter too ....




NPR still comes in strong each morning too , i simply love all the TECH. on National Public Radio ....

thanks mr Russ 8000 for tuning my tuner pegs & adjusting my antenna adjuster too .....


.

matt






View attachment 3595171
.

That looks awesome! Cannot wait to get mine back!

 

[Tswaff]

That looks awesome! Cannot wait to get mine back!

After reviewing ToyotaMatt photo, I realize I do not have the connecting wires shown in his. Are you able to provide new wires? Or direct me to someone who does?

 

[Engineer8000]

yes, I can make you up a pigtail. I have your radio, I am finishing up another one the next couple days and will start on yours.

 

[Tswaff]

yes, I can make you up a pigtail. I have your radio, I am finishing up another one the next couple days and will start on yours.

Thank you

 

[Engineer8000]

Working on this recently. It was really nasty inside. The tuner was completely seized up, the tone control was corroded in place. I was able to get everything back functioning, after giving it a bath. Replaced the big caps and pilot light.

 

[ToyotaMatt]

it's finally on the way Russ ,

the rear cord wires i think need a new oem kit installed , those claw-like hooks are impressive ...

thanks ,,,

m

 

[CruiserTrash]

it's finally on the way Russ ,

the rear cord wires i think need a new oem kit installed , those claw-like hooks are impressive ...

thanks ,,,

m




View attachment 3611768
View attachment 3611769

This is incredible

 

[ToyotaMatt]

 

[Engineer8000]

I have a few items I am working on but when they are done I will be shutting down cape fear electronics.