Glad it worked out. Good luck finding a 80!
Buyin', Sellin', and Tradin'
- Thread starter CandyPants
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Glad it worked out. Good luck finding a 80!
New LX on the way, Wagoneer has to go. If anyone is interested in Wag or knows someone looking for one, here is my IFSJA ad. http://www.ifsja.org/forums/vb/showthread.php?p=1603724#post1603724
Rob
Rob
May want to check the mileage, unless it really has 780,000 
Yes sir! Title on way and Summit getting on Transportation. Will post up some pics when it gets here.
Complete (unlocked) front axel from a 1995 LC. Great cond 500 obo
I have center caps (8) and a pair of complete original running boards off of a '93 FZJ80.
email or text
cbr.usc001@gmail.com
706-525-8263
email or text
cbr.usc001@gmail.com
706-525-8263
Wagoneer sold. LX on the way. Feeling good.
Anyone have a front, drivers side floor mat they would part with? Saving up for WeatherTech but currently have nothing down. Don't care about color or Toyota vs Lexus - just something temporary to put down. Thanks
Rob
Rob
Also need a Driver door master window switch and a driver door window regulator. Any help is appreciated!
-Rob
wagonteeth
Hippoverde
For master switch-
http://www.ebay.com/itm/170911069933?_trksid=p2060778.m1438.l2649&ssPageName=STRK:MEBIDX:IT
This is likely a Chinese part, but searching for the part in Toyota original, even used, runs $85 plus, and over $200 for new
for floormats, I just bought some cheap gray ones from Walmart for $14. They are cloth and match, but cheap enough to trash if they get too dirty. I can't speak for weathertech, but I've had expensive mats and haven't been impressed.
Last edited:
Hecho in China junk. I'd rather go to the junkyard and get a used Toyota part.
There is a reason they give you a discount when you buy 3 or more. You are going to need three.
wagonteeth
Hippoverde
I knew I should have kept my underground Chinese parts bidnus to myself
If nothing else, the link indicates that you can pull the parts from a Camry instead of just an 80 series.
If nothing else, the link indicates that you can pull the parts from a Camry instead of just an 80 series.
Anyone looking for a great family companion? Our Black and Tan mix had puppies yesterday. Dad is our German Shorthair mix. Combined ~ 3/8 lab.
Free to good homes.
View attachment 1021998
Free to good homes.
View attachment 1021998
Alright, I bought a 79/40 last summer that had lockers installed by PO in front and rear axles. Since i don't wheel it, I had removing them on my list of things to do to it. I was recently introduced to a guy that had a rolling chassis from a 1980/40 with stock axles. After thinking it over, then negotiating price, i will be getting it delivered on 2/15.
That said, i will be swapping the axles out around that time and will have them for sale. The rear has an Aussie locker and the front is a Toyota
E-Locker. The gearing was changed to 4:11 and the rear was upgraded to a disc brake conversion along with new seals. The lockers work great, I just have no use for them. Anyone interested can come by to check them out as they are still on the 79. power steering fluid is what is covering the E-Locker. the price is $1200, thought i would give GA Cruisers first shot at them.
Here is the build thread describing the install.
https://forum.ih8mud.com/40-55-series-tech/98297-project-colonel-1979-fj40.html
That said, i will be swapping the axles out around that time and will have them for sale. The rear has an Aussie locker and the front is a Toyota
E-Locker. The gearing was changed to 4:11 and the rear was upgraded to a disc brake conversion along with new seals. The lockers work great, I just have no use for them. Anyone interested can come by to check them out as they are still on the 79. power steering fluid is what is covering the E-Locker. the price is $1200, thought i would give GA Cruisers first shot at them.
Here is the build thread describing the install.
https://forum.ih8mud.com/40-55-series-tech/98297-project-colonel-1979-fj40.html
Where are these located?
I still have an 80 series (unlocked) complete front axel sitting in my garage for sale.
