Buyin', Sellin', and Tradin'
- Thread starter CandyPants
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Put me in line for the 8274. I can pay for shipping, or pick up at gsmtr if you head to that event.
I can walk you through some tests (if you're interested) to identify what's wrong with it too if you want to keep it.
I can walk you through some tests (if you're interested) to identify what's wrong with it too if you want to keep it.
Both are sold. Thank you.
I bought a rebuilt motor only to pull the valve cover today and find the timing chain was broken. Joy. This is the sign I needed to tell me to move on from my current 80 and start fresh. That said, I'm looking for an 80 that runs well and has a good body on it. I'm going to switch over all the armor, and most other aftermarket stuff from my current 80, so runs well and body in good shape are my only real requirements. The rest can be handled. I need something that I can drive now and worry about the rest as I have time.
It's probably a long shot, but would anyone have any interested in my 80. I'm about to pull the rebuilt motor and put a new timing chain on it this week if there is zero interest (I believe that the chain was bound up or off a tooth or two). I would like to get $14,500 as I have more than that in it at this point. I know it's alot for a non running 80, but It's worth more than that in parts and almost done. I'm just running out of steam on the project. I'm in Athens.
forum.ih8mud.com
Build - Call me Deacon Blues
White Sheep is dying. Came home from the Ol North State Cruiser's Relic Run Sunday morning 6 Jun 21. My daughter screamed and cried the whole hour coming back. Gave White Sheep a quick bath and inspection. Few things needed tightening, oil level sensor hanging on by a thread, but no big deal...
forum.ih8mud.com
I’m looking for a 69-72 F short block if anyone has one collecting dust.
The Odd Iron shop truck is officially for sale. A very inexpensive way to enjoy the 70 Series pickup experience. Details are available at www.oddiron.com.
In case you are still interested, my 80 is listed for sale on Mud. It is driven daily to work.
SOLD - Raleigh, NC: 1995 Toyota Land Cruiser (Nightshadow Pearl)
$6,500 298,200 miles (as of June 3, 2025) Nightshadow Pearl (dark blue) with black Rhino-liner on the bottom half and fender flares. Daily driver to work, starts every time. Owned since 2010. Maintenance & repair records from 2015 to present The frame is rust free (lived in NC, SC, GA, and AZ...
forum.ih8mud.com
I finished motor up and it is running fantastic. If I had room where I just moved, yours would be a big consideration though.In case you are still interested, my 80 is listed for sale on Mud. It is driven daily to work.
SOLD - Raleigh, NC: 1995 Toyota Land Cruiser (Nightshadow Pearl)
$6,500 298,200 miles (as of June 3, 2025) Nightshadow Pearl (dark blue) with black Rhino-liner on the bottom half and fender flares. Daily driver to work, starts every time. Owned since 2010. Maintenance & repair records from 2015 to present The frame is rust free (lived in NC, SC, GA, and AZ...
I’m looking for a clean 1991 or earlier Suburban 4x4 if anyone has one or knows of one for sale.
I'm looking for a Slee or Dobinson's 6" lift for my 80. Mainly the springs and shocks. The Slee Front Control Arms would be a massive plus too. Same with the Slee/ADS shocks. I thought that I would put wanted to post up to try and save some money. Thank you.
cruiserinsanity
SILVER Star
I'm parting out an '87 Minitruck if anyone needs parts.
forum.ih8mud.com
I'm also looking for a decentish Long Bed for a '79-83 pickup.
Parting Out - Tallassee, Alabama, 1987 Toyota 4x4 Pickup
Parting out a 1987 Toyota 4wd Truck. No engine, G52 transmission. Bed is rusty, cab and frame are solid. I’m keeping the rear axle and front hubs, and probably some of the engine parts in the cab. I’ll ship small pieces, but large stuff is local pickup/ MUDSHIP.
forum.ih8mud.com
I'm also looking for a decentish Long Bed for a '79-83 pickup.
Cross posting a Warn XD9000i I have for sale, works.. $300
Ran this winch on my FJ40 and then my FZJ80 for awhile. Sold the FZJ80 and I run a 8274 on the FJ40 now. This has been on my shelf almost 10 years.
Includes remote, wire cable, roller fairlead. I can text/email a video of me testing it on the shelf.
$300
Includes remote, wire cable, roller fairlead. I can text/email a video of me testing it on the shelf.
$300
Hey All
I have a set of 5 x Method NV305 paired with Yokohama G003 Mud Terrains for sale locally (Sandy Springs) 295-70 R18 (34.5”)
3 tires measure in depth from 16/32 and two tires measure to 14/32. New is 19/32
Method wheels have some minor trail rash in places but look presentable overall.
Local pick up price $1800 (I might consider separating wheels and tires if interest is there)
779.331.9267
I have a set of 5 x Method NV305 paired with Yokohama G003 Mud Terrains for sale locally (Sandy Springs) 295-70 R18 (34.5”)
3 tires measure in depth from 16/32 and two tires measure to 14/32. New is 19/32
Method wheels have some minor trail rash in places but look presentable overall.
Local pick up price $1800 (I might consider separating wheels and tires if interest is there)
779.331.9267
@Hugh Heifer doesn't Penny need new mudders?
For my 16 inch steelies.
Anyone have a decent 1F head with complete valve train? People used to give those away!