Buyin', Sellin', and Tradin' (5 Viewers)

[AuburnFJsexy]

Where's it located?

You gonna buy another 40?

 

[schmitty]

You gonna buy another 40?

I wish but it's a little over budget. It is closer to me then most everyone else looking at this post.

 

[HENDOG]

Yeah but you have the Rocky Mountains to climb!!!

 

[3pits]

Hey guys, I am a member of the Upstate Cruisers since I live much closer... I am in Royston GA...pm me an email address and what you are looking for and I will send pics.

I have 2 fj 55s for sale, a 70 and a 78, pm me with an email address if you are interested.

I have a 77 tub on chassis with no m/t/t, but has the majority of what you need to get her running

75 pretty rough tub but has lots of extra parts
75 frame
m12000 winch with remote, cable, hook, electric cables and fairlead and mount for between fj62 frame members, like new $1150 obo
fj62 trailer hitch
front and rear axles from the 75 40

used 40 springs
early 70's bench seat
wheels wheels wheels
tire carriers
40 fenders good and rough 25$-75$
fender skirts
bibs
hoods one rough, one decent
non factory soft top frame bows
1970 gas tank and filler neck
I think I have everything needed for a 2fe... including the block..
hard top sides with glass, some rust holes.. selling mainly for the glass
rough 40 windshield with wiper motor
tank cover
filler pipe covers
gas tank cover
roll bars
windshield hinges
door hinges
ambulance doors
front doors
40 skid plate
2 fj40 firewalls
radiator frames
used radiators
tail gate blank for a 40
rough soft doors
40 wiring harness
toyota truck wheels, I have not tried to fit them on a land cruiser
2f starters
and lots lots lots more......

 

[4xsteve]

Good looking rig!

Yup. And a lot of you should recognize those wheels and tires that are on it in the pic. Those are the ones that came with The Gecko when I bought it and the ones Ted ran at Windrock last winter.

 

[BMThiker]

Not cruiser related, but passing along...Any of you professional landscapers, architects, contractors need a digitizing tablet? My company is selling one of our digitizers, since we are moving to a virtual/on-screen format.

Posted on CL-Atlanta here: GTCO Calcomp digitizer 36 x 48

 

[World Cruiser]

35" tire swap for 33"

I have a set of five (5) Goodyear Wrangler MR/Rs (35"x12.5"R15LT) with ~10,000 miles on them that are mostly road miles. Tread is in good shape with no rips or lug tears. I would like to swap for Goodyear, BFG or Mickey Thompson equivalents in a 33"x11"R15LT.

 

[TeddyBoy]

I have a set of five (5) Goodyear Wrangler MR/Rs (35"x12.5"R15LT) with ~10,000 miles on them that are mostly road miles. Tread is in good shape with no rips or lug tears. I would like to swap for Goodyear, BFG or Mickey Thompson equivalents in a 33"x11"R15LT.

I need a 35" spare. Currently have 1x good 33x12.5x15" MTR (same tire) with about 35% tread mounted on a 60 (i think) factory wheel. I'll kick in the wheel to make it an even swap for your 5th 35" tire.

 

[World Cruiser]

I appreciate the offer but I really need a 11' wide tire.

 

[dragr1]

Lots of stuff on my photobucket page, too much to list individually:

Stuff for sale pictures by dragr1 - Photobucket

 

[mookie]

Parting a rear fj60 axle- linked and trussed

Parting out my linked and trussed fj60 rear axle

Details here-
Parting out FJ60 Rear Axle - Pirate4x4.Com

 

[Land Speeder]

Anybody need an awesome trailer?
80-series axles?
39" IROKS on TrailReady alloy beadlocks?
3FE drivetrain?

All VERY good good prices!
I'm in Auburn, so I'm easy to get to ya'll....

 

[GXO]

Anybody need an awesome trailer?
80-series axles?
39" IROKS on TrailReady alloy beadlocks?
3FE drivetrain?

All VERY good good prices!
I'm in Auburn, so I'm easy to get to ya'll....

Talk to me on axles

 

[justbecause]

Talk to me on axles

That's what I want to see!

posted with my thumbs.

 

[Land Speeder]

Talk to me on axles

stock gears, I have a spare R&P for the front and the rear. All links can go with them if you need them. Since I made the front a "poor man's 3 link" I'll throw in a spare front axle housing... but the stock birfs are shot, I done sold the longs...
A lot of hardware for the price!

edit: Dan, I'll sell you the rolling chassis with the engine for a few bones more... It'd be easier to load that way! It was running until I removed the alternator and found that I couldn't rebuilt it!

 

[GXO]

stock gears, I have a spare R&P for the front and the rear. All links can go with them if you need them. Since I made the front a "poor man's 3 link" I'll throw in a spare front axle housing... but the stock birfs are shot, I done sold the longs...
A lot of hardware for the price!

edit: Dan, I'll sell you the rolling chassis with the engine for a few bones more... It'd be easier to load that way! It was running until I removed the alternator and found that I couldn't rebuilt it!

Wouldn't need mounts, would be turning the front, etc for sas so no worries.

Will talk to ya soon.

 

[HENDOG]

Send pictures of tires please.

 

[Land Speeder]

Send pictures of tires please.

First 9 pics are of them
Irok tires pictures by ericnhagan - Photobucket

lemme know if it doesn't work.

 

[ExpoGeorgia]

Been toying around with the idea of selling the FZJ80 because I'll be leaving for basic soon. Here's my for sale ad with pics if anyones interested..

https://forum.ih8mud.com/vehicles-trailers-sale-wanted/603444-ga-1994-land-cruiser.html

 

[Land Speeder]

Been toying around with the idea of selling the FZJ80 because I'll be leaving for basic soon. Here's my for sale ad with pics if anyones interested..

https://forum.ih8mud.com/vehicles-trailers-sale-wanted/603444-ga-1994-land-cruiser.html

I wish.
Your driver window switch prolly got carbon build-up on the rocker... a quick clean should fix that problem that alot consider a deal breaker...