- Joined
- Jul 22, 2012
- Threads
- 583
- Messages
- 16,418
- Location
- Winter Park, Florida
- Website
- www.cruisermatts.com
That looks great
Builds BurntToast's FJ62 Build "Hoss" (6 Viewers)
- Thread starter BurntToast
- Start date
-
- Tags
- fj62
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #642
Upon further review, and a strategically cut 1 1/4” piece of PVC tube, we may get away with no line changes
- Thread starter
- #643
At the swaybar, this should allow for 5” uptravel which is plenty for me.
I run a AN fuel line and custom exhaust with the V8 swap so YMMV on this exactly. From the edge of the shock mount tube to the center of the new tube is 5.25”. Perpendicular to the bottom of the frame, up 2.25”
For the axle side, 2” from the flange, aft side of the axle
I run a AN fuel line and custom exhaust with the V8 swap so YMMV on this exactly. From the edge of the shock mount tube to the center of the new tube is 5.25”. Perpendicular to the bottom of the frame, up 2.25”
For the axle side, 2” from the flange, aft side of the axle
Last edited:
