bunch of pig stuff, needs to go...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 21, 2006
Threads
46
Messages
478
Location
H.B. CA
Location
United States
bunch of pig stuff, needs to go... New pics/updated - 8/25/09

Updated and more pics 8-25-09

Right now I have a pair of front doors for a '77 (rounded window frames and no windwings) in pretty good shape. I don't have time to be shipping these, but if someone wants to pick them up they are free. I was going to sell them, but they are in the way right now.

I think I stole the door locks and had them rekeyed for my '73...





Located in H.B. CA 92646
DSCF0042.webp
DSCF0045.webp
DSCF0046.webp
 
Last edited:
W H??

What Happened?? its 8-14 no update??:lol::whoops:
 
column on left out of '77 - on right out of '73. The one on the left (with cover off- but I don't think there's anything wrong with it- it's just off) has the plastic broken off turn signal lever. The '73 is complete - both wheels in good shape. I might keep the lower column that's in the pic here...
1 (2).webp
1 (3).webp
1 (4).webp
 
Last edited:
Air cleaner $20
I have at least 2 sets of steering box's and draglink/center arm assemblies. I remember everything being real tight and in good shape (just not as good of shape as power steering!) anyone want spares? make offer...
1 (4).webp
2 (2).webp
2 (3).webp
 
Last edited:
Wiring harness out of the '77 piggy. Removed from the vehicle intact except for where someone cut the tailgate wiring right where it goes into the tailgate. I can't remember if the 2f from the '77 still had the toyota carb on it or not... but the wiring under the hood didn't seem to be molested...? anyways almost complete loom for a '77 pig - still has a few things like the coil/ignitor attached to it... $15?
2 (4).webp
2 (5).webp
2 (6).webp
 
Last edited:
drivers side fender from the '77. really good shape. I want to say there are no dents, but it's been getting moved around quite a bit... Upper and lower halves seem to have been seperated at some point. There was a sheet metal screw towards the front (between the two pieces where they are normaly tack welded), and without it the two pieces almost detach from each other... so I don't know if that pig had been repaired at some point - also there is some kind of caulking/bondo/sealant along the seam between the two parts? Someone trying to make it look like it's all one piece? (looks like it will scrape off with a razor real easy). This thing is actually too nice to save for my project '73 piggy...
$50

I could find a way to ship this one if someone needs it real bad.
2.webp
3 (2).webp
3.webp
 
Last edited:
Not really sure why I posted pics of the hood... I still might use it on my '73, but it's not as cool looking as the one on the '73 (just a lot nicer!)
3 (3).webp
3 (4).webp
3 (5).webp
 
Last edited:
I have the pass side fender too, but it got killed at the hands of a dumb f%^$ with a forklift. It's also really rust free, but badly dented. I may be cutting some metal out of this one to patch my '73 up...
might be willing to ship sections of it - but the lower end and front are pretty bad so...
Fenders (2).webp
Fenders (3).webp
 
I have a lot of small crap, and may not have some of the smaller things in the pics anymore (but probably).
Pricing on this stuff does not include the ride (if being shipped) and is based more on P.I.T.A. time for me, if I have to ship it, than anything else.
If there's no price on something come up with one.
I would rather not ship doors/hoods...

In a perfect world a supermodel with a truck and trailer would show up, blow me, and just drive off into the sunset with all of this crap...
but untill that happens, I'll give everyone here a crack at any parts they might want/need...
 
Last edited:
lost a few PMs at the end of the week. I'll try and sort things out and get back on this stuff tomorrow and tues.
 
Few more:

Smog pump used to turn freely, but after sitting for a year or two will not turn anymore. Need brackets or something? Coolant overflow does not have the correct cap, but looks to be be in nice shape. Two almost complete steering setups...
CIMG0048.webp
CIMG0049.webp
CIMG0047.webp
 
For PabloCruise: It's dusty!
this is the center section that I have from a '73. it's in real nice shape except for that extra hole - between the hazard and cigarette lighter. Don't know what kind of pig you're putting it in...Slip a black plastic plug in there and call it good?

The one in the pic a few posts up is from a '77 and the heater/fan controls are different, and the rear heater switch is in a different place. Still haven't found the radio, but it wasn't factory (I think) so I'm not looking too hard...
CIMG0068.webp
 
Back
Top Bottom