I've had a few that looked like that older one for sure.Sometimes it’s the little things
I sourced a OEM key and had itDell cut by the dealer via the Vin number.
Bingo
For the first time in my ownership, almost 10 years I can unlock the rear hatch or passenger door with a keyView attachment 3718007View attachment 3718008View attachment 3718009So convenient
Builds Broski's Adventure Rig build thread (1 Viewer)
- Thread starter Broski
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #1,482
Back in the shop, my Son got me a tablet for my Birthday working on getting that installed
It's bigger and heaver so making a new brace for it. it will spot welded to the ash try, the ash try will still be functional though it's never been used.
It's bigger and heaver so making a new brace for it. it will spot welded to the ash try, the ash try will still be functional though it's never been used.
- Thread starter
- #1,483
There will also be some regular pre-run maintenance and checks before a upcoming Dusy run 
- Thread starter
- #1,484
Ok so I have been a whiny bitch since I found this
Now I'm going to try to fix it and go wheeling
Now I'm going to try to fix it and go wheeling
AgentOrange
TLCA #28372
You've got this. It's just a frustration to have to deal with it right before a good trip
- Thread starter
- #1,486
3 1/2 hours
This sucks to find, but I'm getting great info for when I get around to pulling the axle and doing some reinforcement.
- Thread starter
- #1,488
About as clean as I can get it
- Thread starter
- #1,489
First pass letting it cool
- Thread starter
- #1,490
AgentOrange
TLCA #28372
Done deal and looks good. Now wheel the thing and report back with some good pics
- Thread starter
- #1,492
- Thread starter
- #1,493
Thirds back in control arm are in 
On the mend !!!
Just have to button it all up
On the mend !!!
Just have to button it all up
DAMN, You got some $hit done! Obviously you know your way around your 80.
I like those extra ears. I have idly thought about a set of plates that incorporate reinforcement like that. Seems like a good way to distribute those loads a little more.
- Thread starter
- #1,496
Let's just say I have broken a few things
- Thread starter
- #1,497
I also found the index ring lose in the housing.
I came up with this to get back in.
1"x1" square tube with 3/4 x 3/4" tube slipped in and a 3/4" drive socket the right size for the index ring.
Some tape to hold the ring on the socket bingo, worked perfect and it was all in the shop !
And a big thanks to @Shoppy for hooking me up with a set of axle seals.
Thanks Shoppy
I came up with this to get back in.
1"x1" square tube with 3/4 x 3/4" tube slipped in and a 3/4" drive socket the right size for the index ring.
Some tape to hold the ring on the socket bingo, worked perfect and it was all in the shop !
And a big thanks to @Shoppy for hooking me up with a set of axle seals.
Thanks Shoppy
Last edited:
- Thread starter
- #1,498
She back together !
5.5 hours this morning. Still need a test drive and then send it
5.5 hours this morning. Still need a test drive and then send it
I'm looking forward to some pics and or video of your trip. Be safe and have fun.
- Thread starter
- #1,500
It's been a hard 3 days, but I think I'm ready
