Broken bumper bracket p/n? (1 Viewer)

[scrubolio]

the driver side portion of my rear bumper is sagging and doesn't stay in the "clips" on the side.

I noticed that this portion of the bracket holding the bumper is broken:

Is that part of this piece on the diagram?

Thanks!

 

[TeCKis300]

the driver side portion of my rear bumper is sagging and doesn't stay in the "clips" on the side.

I noticed that this portion of the bracket holding the bumper is broken:
View attachment 3704420

Is that part of this piece on the diagram?
View attachment 3704421

Thanks!

What model year is your LC or LX?

 

[scrubolio]

sorry, 2013 LX

 

[urinalcake]

Here's a pic of the rear 3/4 view with the rear fascia removed so you can see what's underneath.

Looks like part number 52563-60050 and the clip you circled inserts into the hole marked by red arrow.

 

[TeCKis300]

@urinalcake got you covered and I believe he's correct in regards to the actual part you need.

If you also need this bracket that's more along the side, it's 52156-60070

52156-60070 Genuine Lexus Support, Rear Bumper Side, LH

Genuine 52156-60070 Support, Rear Bumper Side, LH fits 2008-2013 Lexus LX570. LexusPartsNow offers 5215660070 for $50.30.

www.lexuspartsnow.com

 

[scrubolio]

thank you both for the help!

the part was under the rear combination lamp diagram...i would've never figured that out

 

[Indiana80]

Here's a pic of the rear 3/4 view with the rear fascia removed so you can see what's underneath.
View attachment 3704497
Looks like part number 52563-60050 and the clip you circled inserts into the hole marked by red arrow.
View attachment 3704501

Is the bumper support bracket that keeps the rear bumper tight against the rear quarter panel a one-and-done part? My passenger side bumper support needs to be replaced- no longer locks in the bumper cover where it meets the wheel well. Since I have to pull the bumper cover to replace it, wondering if I should replace driver side also? Or, maybe I’ll be able to just pull back passenger side without remove entire cover? Never pulled a rear cover on one of these before. Thanks for any advice.