Bracket for cut glovebox support bar, no screws required

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

This is on my to-do list so I guess I need one too. Should I PM you?

Thanks!
Yep shoot me a PM. I’ll send you my venmo or PayPal details.
 
Heads up, I'm going on vacation and won't be able to send additional units until September 6th. If you're thinking about getting one, reach out today please!

Thank you to everyone who has bought one so far. Please share photos of it installed!
 
I dont have pics, but i can confirm it works on a 2001 LC100. Just installed it. Thanks for a great product! :beer:
 
Damn, I cut mine a bit too far to the right for that bracket to work.
 
Damn, I cut mine a bit too far to the right for that bracket to work.
Can you send a photo? Maybe there’s something we can figure out
 
Damn, I cut mine a bit too far to the right for that bracket to work.


Maybe you can buy two brackets, cut the screw part off one of them and use some type of super glue to bond them together. Take a pic and post measurements.
 
Worked like a charm, thanks Clayton!

IMG_20220827_141416.jpg


IMG_20220827_141411.jpg
 
Replaced my evap this weekend and it was a breeze.
Thank you for creating this simple solution for the dash cut. Works great!
 
Replaced my evap this weekend and it was a breeze.
Thank you for creating this simple solution for the dash cut. Works great!
Thank you for taking the time to leave feedback! Its great to hear. I'm glad it helped.
 
I need one of these I think. No way in hell I am taking my whole dash out just to remove the evaporator!
 
View attachment 3026824
Go from a cut glovebox support to a fully functional one again.

If you have cut the plastic glovebox support bar to service the evaporator, this bracket is for you. Normally to repair the severed support bar, you'd need to purchase some sort of metal bracket and attach 2 or 4 screws to hold the support bar back in place.

Instead, this bracket uses the existing dash bolt and shape of the dash to fully secure the support bar back in place. No additional cutting or screws needed.

Available for the following configurations:
  • 99-07 100 Series LHD
  • 99-07 100 Series RHD

I'm new to 3D printing, but I wanted to finally create something for the cruiser community. I cut my 2006 LC glovebox support bar this weekend and created this bracket to fix it. It holds really strong, just like before I cut it. And I'm happy I didn't have to mess around with attaching screws and all that.

Attaching it:


Testing it:


Bottom view with glovebox attached:
View attachment 3026802

Price: $16 shipped

To purchase, please DM me. I'll need your address. I accept paypal and venmo for payment!

Update 9/13/22: Updated price from $10 to $16 now that I know it fits in '99 - '06 and I know what shipping safely actually costs.

Update 5/15/24: Lots of people have been reaching out. Yes I'm still selling these, please DM me if you're looking to quickly repair your cut glovebox support! I am able to ship worldwide. Cheers.

Update: 8/9/24: Created a bracket that fits right hand drive 100’s as well.
 
I need one of these as well, sent a dm, AC is not working and would like to get this (if your still producing them) before I tackle the evaporator replacement thanks
 
Used the brackets in 2 100’s this week and worked great.
Thank you for providing this part for our Cruisers.
Love to hear it!

For people who need them, just DM me. Maybe I’ll set up an online store so it’s easier to order.

I have LHD and RHD versions, can ship worldwide.
 

Users who are viewing this thread

Back
Top Bottom