Bowfin (5 Viewers)

[Old Nick]

Or any big load.

View attachment 3930051

View attachment 3930052

That is some fine pork right there ^

 

[coldicer]

I would like a rack as well. Are the cross members customizable on location? I need a large opening on the front half for my ragtop. Need to be able to stand up in my rig through the roof and wave at people as I go down the road.

 

[bobm]

View attachment 3929972

Anyone know where I can find these little guys. I am guessing that Mr Bowfine does not have any to sell.

Looks like a weld on lock nut. You can get them in free running also. Spotweld is ususal tingmethod. They also come in floating riveted pieces with 3/32 solid alum rivets . @J Mack is correct. Mcmaster Carr

 

[tucker74]

I would like a rack as well. Are the cross members customizable on location? I need a large opening on the front half for my ragtop. Need to be able to stand up in my rig through the roof and wave at people as I go down the road.

The racks have a ~12” slot the bars can be moved back and forth in, you can also remove middle bars (but not ends). Have one of these on my 100 and love it, great racks & company. The t-bolts are easier to use than those nutcerts for adding gear (don’t have to remove bar to install - all the 10 series stuff fits)

(QTB-010-K) 10 Series Quarter-Turn, Drop In Stud – 1/4-20 – Nickel plated w/ SS washer and SS hex nut | TNUTZ

10 Series Quarter-Turn, Drop In Stud - 1/4-20 - Nickel plated, with stainless washer and stainless Hex Nut - TNUTZ Part #QTB-010-K. This ad is for one kit. These quarter-turn bolts will fit 10 Series / Slot 6 extrusions. These connectors are unique to TNUTZ! They will fit 10 Series or 6mm slot...

www.tnutz.com

 

[Godwin]

Anyone who has a 55 should have a Bowfin rack on it. A few reasons, it's a very well made roof rack, it's solid and versatile, and perhaps the most important it's likely to be the most substantial part on an old 55 and you need the rack to help hold the rest of the Cruiser together.