Builds Benjamin’s 3D Prints Build (7 Viewers)

[nspindel]

Before you get a new printer just make sure the ice cream won’t melt!

 

[silverhammer]

I am still trying to buy a used unit on eBay. Didn’t find one.

Ben, I'd be happy to remove and send you mine. I'm not positive if it's stock or not. Let me know your thoughts.

 

[BenCC]

Gotcha, I thought somebody was sending you one. No worries!

Ben, I'd be happy to remove and send you mine. I'm not positive if it's stock or not. Let me know your thoughts.

View attachment 2639306

View attachment 2639307

I have seen at least thee different styles of the DVD units. Dealers across the states might have just installed whatever they got. My concern is the bolt pattens they used.

 

[Vector7]

Any updates to the foglight mounts for Baja Design lights?

 

[BenCC]

Any updates to the foglight mounts for Baja Design lights?

Yes a little haha

 

[BenCC]

Yes a little haha

View attachment 2640500

This prototype is to test if I could fit one Squadron and one S2 in there. I will have one version for only a Squadron and one version like this.

 

[BenCC]

Yes a little haha

View attachment 2640500

Oh right, I already got a set of used LX470 fog lights off eBay.

 

[Natchez]

This prototype is to test if I could fit one Squadron and one S2 in there. I will have one version for only a Squadron and one version like this.

The LX opening can hold two Squadrons. Looking at doing a SAEDoT version as a running fog light and a standard as an offroad light.

 

[Trophytruck481]

hey Ben, done anymore on the ashtray replacement panel?

 

[Dave Crowe]

Ben.

I will happily volunteer for beta test on lx470 fog light prototype if needed.

 

[BenCC]

hey Ben, done anymore on the ashtray replacement panel?

Sorry no update on this one

 

[gvn]

I have seen at least thee different styles of the DVD units. Dealers across the states might have just installed whatever they got. My concern is the bolt pattens they used.

Mine is different too and it looks like they just drilled into the metal to mount it. I can send pictures, measurements if that helps.

 

[doughboi]

Yes a little haha

View attachment 2640500

These look awesome! How do I order a set?

 

[blackohio]

Yes a little haha

View attachment 2640500

s*** i’m so down for those. on the left is there room to drill it to run a small led turn for people not wanting to convert to LC turns

 

[BenCC]

These look awesome! How do I order a set?

thanks. Not completed yet. Need to tweak some small features.

 

[BenCC]

s*** i’m so down for those. on the left is there room to drill it to run a small led turn for people not wanting to convert to LC turns

These are for LC only. Will have a version for 470.

 

[blackohio]

These are for LC only. Will have a version for 470.

 

[RootMeanSqr]

good idea. The part is printed facing down. So adding a feature would prevent this print configuration. I can add a bolted on raised feature.

Makes sense. Maybe just make the opening on the face have a gap around the switch and then print a second part that would install from the rear and protrude a few mm on the front. Just sandwich the second piece between the switch and the faceplate.

 

[blackohio]

Heres my Switchpro panel installed into a dirty ass surround

 

[cboyd]

thanks. Not completed yet. Need to tweak some small features.

i'm definitely down for this... SAEDOT Fogs for me too to replace my factory fogs running in a TJM bumper! if i can get a 2nd light for flood/ditch, that would be a bonus, but I'll take what I can get!