ARCHIVE Battery Disconnect Overkill...my OCD will be my downfall

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

NLXTACY said:
I'll post a new one and replace my original post as not to confuse. I'll do it this morning.
Click to expand...

Did you get a chance to update mine?
 
Dissent said:
Is it possible to get all the holes and etching except the gauge and gauge switch? I'll definitely add the Flaming River switch and 12v Outlet as money permits.
Click to expand...

Good to go?
SilkScreen-DSNT.webp
 
Ok so three down so far. I'm trying to get as many on board as possible before I submit my metal order. Once it goes in all of the hole options go away. Sorry, won't have a choice once I pull the trigger. The laser etching won't be an issue. It can change all the way up til the day of.
 
Its also been brought up that the disconnect does not really need to be for safety, storage or security. The very same unit can be used as a winch disconnect/cutoff. I can just as easily change over the etching to detail that. Everything stays mostly the same but the 1/0 ground cables would be direct to the winch instead and all I would need is just the lengths.
 
NLXTACY said:
Its also been brought up that the disconnect does not really need to be for safety, storage or security. The very same unit can be used as a winch disconnect/cutoff. I can just as easily change over the etching to detail that. Everything stays mostly the same but the 1/0 ground cables would be direct to the winch instead and all I would need is just the lengths.
Click to expand...
and this is really what i was wanting mine for... but i figured it would be a good time to mount a blue sea and tie the winch in through that...
right now my winch is not tied in through a cutoff :( good thing i just got a fire extinguisher onboard :/
 
Carcass said:
I'd like to say I'm in for one w/ gauge and all, though I'd want to know the final $ first. Won't be able to check this thread for a few weeks, though, as my fiancee and I are getting hitched and taking the LC on a trip for our honeymoon :bounce:

Would be inclined to pre-order if you wanted to PM me with final price so I can paypal, though...
Click to expand...

Ok guys I got the option for the water temp gauge and switch on the check out page:
Power and Battery Disconnect System

If you want the gauge and switch and additional wiring then just click the option checkbox.
 
BTW, I'm likely going to submit the machining order this coming Friday. Any changes to the cut need to happen BEFORE this coming Friday. After Friday the mount will be unchanged.
 
I think my order is updated and correct now. Full disconnect and water temp guage and switch. Does it look right to you?
 
Btw, I'm not opposed to adding your truck name, MUD handle or cosplay character to the etching ;)
 
NLXTACY said:
Btw, I'm not opposed to adding your truck name, MUD handle or cosplay character to the etching ;)
Click to expand...
Hmmmm, that's pretty cool. I'm thinking.
 
You must log in or register to reply here.

Similar threads

dplenty99
My license plate light was disconnected when I bought the 40....
Replies
16
Views
952
sggoat
sggoat
nikramos
My 76
Replies
5
Views
1K
nikramos
nikramos
Satanic mechanic
My Pig conflict
Replies
10
Views
851
PabloCruise
PabloCruise
B
Bumper for my 80 after being rear ended
Replies
7
Views
520
baldilocks
baldilocks

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom