Anyone tried Xenopro LED headlights?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Well, I must report that these are the brightest bulbs I have ever had in any OEM light housing ... ever.

I think you would really like these for the HID bulbs, I have them and they are a really nice bright white color (almost like a modern LED headlight). The price on Amazon Japan is also really good and they are 100% real Philips bulbs.

https://www.amazon.co.jp/gp/product/B00XQL73I2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Really hard to get a good photo but I tried....

7821DCA8-0E8F-4EDA-B7CE-6B23262D247A.webp
 
Last edited:
I think you would really like these for the HID bulbs, I have them and they are a really nice bright white color (almost like a modern LED headlight).

Thanks for the heads up - those do look good. I didn't realize how yellow my HID low beams looked until today.
 
[QUOTE="KLF

Cons: No heat, so like yesterday when driving through snow/ice with them on, the headlights got crusted over. Had to stop and chip them clean at one point. The headlight washers were NO help at all. Maybe it was a function of very low temps (mid-20s) and freezing rain, not sure if even the halogen bulbs would have stayed clear.[/QUOTE]

Same thing happening to me right now through a canadian snow storm. Since I have the high beam installed in fog pumping out 5,000 lumens even with them being completely blocked by snow/ice I am still getting alot of light on the ground. Canada doesnt have highway lights in and out from toronto so the light was needed.

Fyi, got pulled over for doing 60mph in the strom and cop couldnt believe how well my KO2s were handling. He lost control 4 times trying to catch up. Got off with a warning.
 
Are the IPF 301HLB compatible with the AFS and self leveling systems of the 2011 LX570?
Thanks!
 
They work with AFS and leveling in my 2010 LX but you will need to modify the dust caps. I posted earlier in this thread (#147) with what worked for me. I have a spare set of 301HLB for sale if you are interested.
 
They work with AFS and leveling in my 2010 LX but you will need to modify the dust caps. I posted earlier in this thread (#147) with what worked for me. I have a spare set of 301HLB for sale if you are interested.

Thanks for the post! I ordered the same caps for my 2008 and a set of the second gen IPF LEDS Low Beams (301HLB2)
 
Thanks for the post! I ordered the same caps for my 2008 and a set of the second gen IPF LEDS Low Beams (301HLB2)

I guess the LX has a different dust cap requirement(?), because I didn't have to change anything when installing into my 2008 LC.
 
I think you would really like these for the HID bulbs, I have them and they are a really nice bright white color (almost like a modern LED headlight). The price on Amazon Japan is also really good and they are 100% real Philips bulbs.

https://www.amazon.co.jp/gp/product/B00XQL73I2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Really hard to get a good photo but I tried....

View attachment 1596346

My driver's side light has been flickering intermittently for a while. Might need to be swapped with these. Hoping it's not the ballast.
 
I guess the LX has a different dust cap requirement(?), because I didn't have to change anything when installing into my 2008 LC.

Not sure if the LC has the AFS system? The LX has a totally sealed hard plastic cap that screws onto the back of the housing.
 
Of the lights being on? I can try to take some tonight but they don't really show up well. Gimme 6-7 hrs til it gets dark
 
Of the lights being on? I can try to take some tonight but they don't really show up well. Gimme 6-7 hrs til it gets dark

Can you confirm again, which LEDs did you get that did not require new dust caps?
 
Cool thanks! It's great these fit behind the factory dust caps. Mind if I ask a few questions?

1. Do you know if these are made in Japan or China? There's an line on the Amazon page stating these are the most popular LEDs in Japan.
2. How is the brightness compared to OEM HIDs?
3. When you installed these LEDs, did you just unscrew the dust caps and replaced the OEM halogens? Did you have to remove the battery?
4. How long have you had these? Have you heard how long these can last?
 
1. Made in China designed in Japan
2.My truck did not come with HID (09) and these blow the halogen bulbs away
3. just unscrewed the battery brace on top, that gives enough clearance to reach it. You will end up with few scuffs on your hand.
4. only about a week. Warranty is 2 years replacement so they will last at least that long. When you get a new set, you get a 2yr warranty again.
 
1. Made in China designed in Japan
2.My truck did not come with HID (09) and these blow the halogen bulbs away
3. just unscrewed the battery brace on top, that gives enough clearance to reach it. You will end up with few scuffs on your hand.
4. only about a week. Warranty is 2 years replacement so they will last at least that long. When you get a new set, you get a 2yr warranty again.

Thanks. I look forward to your pics tonight if you get a chance. The OEM halogens stink and I can barely see the roads in the morning and at night. I swear my neighbor's CRV and Prius have brighter low beams.
 
I live in a rural area and I know exactly what you mean. My 2002 GS300 has hid's that destroy the halogen in the LX.


Thanks. I look forward to your pics tonight if you get a chance. The OEM halogens stink and I can barely see the roads in the morning and at night. I swear my neighbor's CRV and Prius have brighter low beams.
 
Here are some pics, phone pics don't really look great. but you get the idea. They are whiter in real life, phone gives it a blueish tinge
IMG_0542.webp
IMG_0812.webp
IMG_2527.webp
IMG_5853.webp
 

Users who are viewing this thread

Back
Top Bottom