RyanR
Reactions
763

Latest activity Postings About Badges Post areas

    • RyanR
      RyanR reacted to 2014 LEX 570 GA's post in the thread Good seat cover for 200 series? with Like Like.
      Equipt told me they don’t make them for 2015 LX 570 (either because LX bolstering on front seats is different from LC and/or because of headrest monitors) - can anyone confirm whether they have Escape covers on a 2013-2015 LX?
    • RyanR
      RyanR replied to the thread Good seat cover for 200 series?.
      Where you able to get these installed? Trying to compared the LC rear seat entertainment system to the 2013 LX version it looks like the location and size of the screen bracket are very close... I am hoping it is possible to squeeze the LC covers...
    • RyanR
      The bulb seal is a good idea and if the sunroof glass touches it, it should just compress. I think really any change would solve the issue. It seems like it is a very specific resonate frequency it hits at a couple speed ranges and all hell...
    • RyanR
      It does sit very close to the front portion of the glass but it does not touch when tilted up or opened.
    • RyanR
      Good to know others experienced this as well. For the first 20,000 miles I had zero complaints, the racks was about the same as my previous Prinsu, super quiet. I believe over time the buffeting on top of the glass beat up the sunroof mechanism...
      • RoofRaft.jpg
    • RyanR
      RyanR replied to the thread Baja Design fog lights.
      Here is the stats from my order: "SS3 LED Fog Light Kit for 2016-2021 Toyota Tacoma, Power Level: Pro, Lens: Yellow SAE/DOT Fog" this kit was direct plug and play for the 2013 LX570 stock fog locations. However when I installed my IronMan front...
    • RyanR
      Yes, it is primarily apparent with the shade open. And I will say it was not something that was really detectable early on... I could feel a little "bass" pressure at certain speeds but it wasn't apparent that the sunroof was actually vibrating I...
    • RyanR
      RyanR replied to the thread Baja Design fog lights.
      For anyone looking for another alternative the DiodeDynamics kits are almost identical and their DOT/SAE lens has a razor sharp cut off. The pro's are insanely bright but the cut off is low enough that I never get flashed by other drivers. These...
      • DDProSEA1.jpg
      • DDProSEA2.jpg
    • RyanR
      It's been a few months since I installed the ARB Base rack, and I will say that while the design of the mounting rails and the rack itself is EXCELLENT their weird inverted air deflector is an awful bit of design. When the rack has nothing on...
    • RyanR
      RyanR replied to the thread 1" wheel spacers issue LX 570.
      Interesting, I did not run into this issue on my 2008 LX with 3/4" spacers. Are you running BORA's or another brand? My previous 3/4" BORA's came with a low profile lug nut that was tapered at the top. The lugs that came with my current 1"...
    • RyanR
      RyanR replied to the thread 1" wheel spacers issue LX 570.
      Correct, the lug nuts that came with my BORA's sit below the mating surface of the spacers. The stud protrudes a bit but fits right into the pockets of the 2013+ wheels, no witness marks inside the pockets. My (now) spare pictured here is the...
      • 2013LX wheel.jpg
    • RyanR
      RyanR replied to the thread 1" wheel spacers issue LX 570.
      The pockets on the hub surface of the 2013+ wheels is longer and skinnier than the 2008 which is more square. The 2008 pockets can fit the whole nut if it protrudes from the spacer. The 2013 pockets will accommodate the stud poking out, but will...
    • RyanR
      Was driving me INSANE!!! Tinnitus is a bang on analogy.
    • RyanR
      Did not have to remove the seat, was able to access/clean everything just by sliding and tilting it to the forward-most position. It was a bit tight and awkward but doable.
    • RyanR
      I just wanted to post this so I can hopefully help someone avoid the madness I just endured. My 2013 LX570 start producing a modulating high frequency buzz. It sounded to my ears like a bad capacitor or something as it was very high frequency and...
    • RyanR
      RyanR replied to the thread Good seat cover for 200 series?.
      Call Equipt I believe they can get you a set with cutouts for the rear seat screens.
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top Bottom