Anyone installed an aftermarket ac system from Maarten @ Cruiserworld into a HJ61??? (3 Viewers)

[sved]

Yep,

You can see in the diagram that they are connected to Pin 2 Black/white and 9 Yellow.
Those 2 are the only one you need. The black and white with the spade connector is the one you do not need. Must be for the VSV switch (Idle upp) . The pump is connected to pin 2 in the diagram.
On the pressure and thermistor switch is doesn't matter which spade you connect because they are just switches.

 

[CenTXFJ60]

Made a little more progress today. Cut some brackets and secured the condenser and dryer. The high pressure line hitting the dryer is gonna be close. Have not tried to connect it yet. Test fitting everything and then I’ll take the wiring. Hopefully this weekend.

 

[sved]

I had to cut some mm plastic at the back of the grill to make it fit. Tight but it worked out.
I see you had at last the same hose configuration.

 

[CenTXFJ60]

I had to cut some mm plastic at the back of the grill to make it fit. Tight but it worked out.
I see you had at last the same hose configuration.

That is good to know Sved. Quick question I should have asked before I re-clocked the compressor…did your compressor come with the appropriate amount of oil in it? There are no labels on this compressor or in the box indicating it does or does not have oil in it.

 

[sved]

Yes , the compressor is pre oiled. The compressor came in the OEM Sanden package with a ''pre oiled '' label.
My AC guy just vacumed the system and charged it with the right amount R134A . I think it was around 850 Gram's. Tight and trouble free since then.

 

[CenTXFJ60]

Yes , the compressor is pre oiled. The compressor came in the OEM Sanden package with a ''pre oiled '' label.
My AC guy just vacumed the system and charged it with the right amount R134A . I think it was around 850 Gram's. Tight and trouble free since then.

Ok. Good to know. I’ve been told they come with oil unless specified. I really don’t want to remove the compressor again. The way it bolts up it’s a PITA to remove and mount back up. Those two lower bolts????

 

[sved]

The 2 lower bolts are added for testing your patience , but it is possible . f iI remember correct i started with the lower first, not quite sure.