Builds Another 74 FJ40 frame off (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

nick

SILVER Star
Joined
Mar 24, 2005
Threads
122
Messages
934
Location
Misssoula
It all started last November, the 11 th to be exact.
Called my friend Brendon and told him I was ready to take the cruiser down to the frame. Without hesitation he said "bring it on over". Within three days we had it pretty much apart.
Here's what we started with...
019_19.jpg
017_17.jpg
Dscf0056.jpg
 
Some of the rust removal.
Most of the rust was removed prior to the frame off--mainly the rear sill.
The heater was taken apart, cleaned, powder coated and put back together with Shane's rebuild kit. The blower was taken apart and cleaned as well then rattle canned.
012_12.jpg
015_15.jpg
018_18.jpg
 
Seam sealer, thick and sloppy! Keep that rust at bay! HA!
Now for the bedliner to cover all the sins. Bought this stuff off E-Bay called U-Pol Raptor. Pretty cheap and it covers 125 sq. ft. with a gallon. About $100 including the gun. It's not very thick, but it has a good texture ( bumpy but not rough- does that make sense?).
030_30.jpg
031_31.jpg
034_34.jpg
 

Users who are viewing this thread

Back
Top Bottom