Builds AK HJ-75 (2 Viewers)

[coldtaco]

After fighting the transmission for two days I removed it this morning to find what I feared. I destroyed the clutch trying to get everything lined up and slipped in

 

[coldtaco]

So bought another one

 

[coldtaco]

This time I put the transmission into first gear so I can wiggle the rear output to wiggle the input shaft to fit into the splines on the clutch and into the pilot bearing. Tomorrow should be done with putting everything back together and fill fluids. Hopefully be able to test drive before I head back to work tomorrow night

 

[coldtaco]

No test drive today some time in history someone swapped in the wrong U-joint yoke (or what ever it’s called) on the long drive shaft. Have to order a new joint and yoke

 

[coldtaco]

Got the new transfer case shift lever assembly back from powder coating. Interesting the differences

 

[jblueridge]

Different model years? Looks like the important connections are in the same places.

I wish I had a responsive powder coater shop nearby.
There is a local guy but he is wayward: kept a porch glider of mine for a year.
Maybe he liked to swing.

 

[coldtaco]

Well, I’m pleasantly surprised that I found a new tach pickup from an online store I never heard of, in Japan. Also got a used one from down under.

 

[coldtaco]

Finally got a correct replacement drive shaft end yoke thing. So took the drive shaft to a shop and got the yoke end replaced with a new joint.

 

[coldtaco]

Installed an under hood 12V power source. Only real place I could find to mount. It’s going to be a pain adding wiring for accessories. Oh well.

 

[coldtaco]

Drove it for the first time since January. Having issues shifting the transfer into 4H, I think I will swap out the new shifter assembly for the old one and see how that goes.

 

[coldtaco]

oh, and that uniclutch seems to work really good, it's like half the pressure from what I had in it.

 

[jblueridge]

Did you use aluminum diamond plate and rivets to make the 12V bracket?

 

[coldtaco]

Did you use aluminum diamond plate and rivets to make the 12V bracket?

yes, not smart enough to cut out one piece and bend to make it like I wanted

 

[coldtaco]

8 yrs already

 

[Gun Runner 5]

8 yrs already

View attachment 3606158

Doesn’t seem that long. The price of fuel at that Raceway has increased just a tad.

 

[coldtaco]

Swapped in the old transfer case shift lever, now it shifts like before, the one on the right

 

[lacalvette]

I tough they (t-case linkage) we’re all the same? Good to know, thanks

 

[coldtaco]

I tough they (t-case linkage) we’re all the same? Good to know, thanks

I expected that too