Hello Mudmates,
After adjusting my ACH sensors for max lift, I was not quite done with the work. I decided to modify the arms to achieve more lift. I originally lengthened them as i thought i saw someone else do this. (I should have paid more attention) After cutting them and using a section of a carbon arrow shaft and JB Weld, I made them 3/4 inches longer. It turns out that in the front, they need to be made shorter as it turned my LX570 into a low rider, Haha. So I pulled them and modified the to be about 5/8ths shorter and the gave me the lift i was looking for.
Here is a pic of the modified arm before i had to redo it and make it shorter. I am very happy with the results.
After adjusting my ACH sensors for max lift, I was not quite done with the work. I decided to modify the arms to achieve more lift. I originally lengthened them as i thought i saw someone else do this. (I should have paid more attention) After cutting them and using a section of a carbon arrow shaft and JB Weld, I made them 3/4 inches longer. It turns out that in the front, they need to be made shorter as it turned my LX570 into a low rider, Haha. So I pulled them and modified the to be about 5/8ths shorter and the gave me the lift i was looking for.
Here is a pic of the modified arm before i had to redo it and make it shorter. I am very happy with the results.