Adjusting headlights in a new 200 (1 Viewer)

[UPR LC]

Hi Guys,

I'm an engineer for TJM here in the USA. I talked with our customer service guy about this and we are going to try to get some of the 658LINK34E headlight adjuster linkage sent to us by air. We are just trying to figure out how many to have sent. How many of you would want one? This should be a regular stocked item in the future.

I would buy one.

 

[Phil Damon]

Hi- I like to know the adjustable range (minimum and max.) measurements. I tried to search for detail specs. and couldn’t find any info for the linkage. Thanks

I'll look into it and see what I can find. I think I know the engineer who designed the part in Australia.

 

[brasskey]

I would buy one also

 

[DesmoPilot]

Count me in for one.

 

[Phil Damon]

Hi- I like to know the adjustable range (minimum and max.) measurements. I tried to search for detail specs. and couldn’t find any info for the linkage. Thanks

I talked to the engineer in Australia and he said the length is 95mm with 25mm of adjustment. I'm guessing 12.5mm in and 12.5mm out.

 

[Orange Hat]

Count me in for one as well…thanks!

 

[scottm]

Would this link work to raise headlights as well? Bullbar lowered my front end about 1/2", I should adjust the headlights up.

 

[jefo13]

Me too! Count me in

 

[TOMSRYD]

I will be in need of one also.

 

[residualboulders]

@Phil Damon i'd like one.

 

[UPR LC]

Would this link work to raise headlights as well? Bullbar lowered my front end about 1/2", I should adjust the headlights up.

Most likely no. You would need to shorten the link from factory, this extends the link length. You could always add toyota front strut spacers to get some height back on the front end, just a thought.

 

[EH200]

So, while I have the self adjust hardware on the rear axle of my 2016, my headlight do not do the self adjust depicted in the videos upon staring the vehicle, is there something I am missing?

I have a 2020 Heritage and mine do not move either (that I've ever seen)

 

[HSTexan]

Hi Guys,

I'm an engineer for TJM here in the USA. I talked with our customer service guy about this and we are going to try to get some of the 658LINK34E headlight adjuster linkage sent to us by air. We are just trying to figure out how many to have sent. How many of you would want one? This should be a regular stocked item in the future.

In 100%

 

[CharlieS]

I'm in for one.

 

[ty240]

I’d buy one

 

[Roscoes]

why won't buy an off-the-shelf part?

bad example but something like this or something from home depot.

 

[calixto]

If the size is right I say yeah but haven't found anything close to the correct adjustable size.

 

[Roscoes]

assume i could have one of my manufacturers fab up something real quick, Going off of the design posted in this thread should be enough to get started.

 

[jefo13]

why won't an off-the-shelf part work?

bad example but something like this or something from home depot.

something like this but the holes need to be bigger…
Amazon product ASIN B07VVQ3V5S

 

[calixto]

Bump, any updates on these?