80 series sub tanks complete system

[SWCruiser]

I will ask about the cannister for the 100 guys but you guys will need to figure out whats involved with the install. I only have an 80 an don't know what needs to be done for the 100s. it seems like the charcoal cannister was relocated to the rear for some years.

 

[semlin]

I will ask about the cannister for the 100 guys but you guys will need to figure out whats involved with the install. I only have an 80 an don't know what needs to be done for the 100s. it seems like the charcoal cannister was relocated to the rear for some years.

i think it is 2003+.

also i guess lx470 owners should expect to have to do their own harness based on the lx450 experience. everything else should bolt in.

still in for a tank here though.

 

[nodaksn3]

Am I too late for a 100 tank? I'm in AZ too. Ned

 

[FloridaFJ80]

I am down for 80 series setup. Please put me on the list.

 

[SWCruiser]

No one is too late yet.... i haven't firmed up prices as i am checking on parts for someone else. I have also asked them to let me know what would be included in the 100 series system if it was a direct bolt in kind of thing.. Im not sure it will be 100% complete but i think the main parts will be there. it looks like the gauge is in the dash so thats kind of a problem. Maybe you guys just need a bulb or too hook up the wiring. It doesn't look like anyone has done the install yet so it will require a pioneer... One way or another Im sure it will work.. Like the 80 subtanks some people have done the install with minimal parts like the tank and filler only.

Ill get a list going soon. I have more 100 tanks than 80s available so anyone wanting the 100s should be covered. Ill see if they can round up some more of the 80s tanks. I hope to have this wrapped up next week and en route no later than the following week. 4-5 weeks to be safe on the slow boat. then i can start shipping or people in AZ can pickup if they like.

 

[FloridaFJ80]

Awesome please keep us updated....

 

[yjeff]

I am in for a full setup for a 97 LX450. I currently have a 45 gal frontrunner tank but without the proper filler, it's install is fairly intensive with trying to keep it emission legal in AZ. Can you source the gas filler necks or get the diesel neck refitted before shipping?

 

[capt bligh]

Please add me to the list for an 80, pending final pricing. Especially with the dual diesel filler neck

 

[cpcc]

Definitely put me down for the 80 set up.
Based on what is included in the 100, please count me in for that as well.
Thanks

 

[alia176]

Can you bring in 70 series tanks too? I understand them to be 25g and fit in the subtank location. Although, I have yet to see a picture of one!

 

[RockJock82]

I am interested! AND live in AZ

 

[SWCruiser]

Alia,
I can ask about the 75 but i don't really want to be asking for parts if people aren't sure if they want them or if they will work. Are you sure this will work for your application?

thanks
chris

 

[alia176]

Alia,
I can ask about the 75 but i don't really want to be asking for parts if people aren't sure if they want them or if they will work. Are you sure this will work for your application?

thanks
chris

No problem, let me do some more research at my end on the fitment. But, it'd be good to know what kind of a cost a 75 tank might run; may help out others too? If the cost will $1000 then I'll simply abandon the project and go a different route.

I'll leave it up to you.

 

[SWCruiser]

probably will come in close to the same but likely higher.. I dont think they are as common. Ill ask but i would like this to conclude by the end of the week so you may want to check on your end regarding fitment.

chris

 

[SWCruiser]

alia, the 75 tanks are scarce and apparently easy to sell on oz.. i can get one but it wil cost an additional 200.

 

[alia176]

alia, the 75 tanks are scarce and apparently easy to sell on oz.. i can get one but it wil cost an additional 200.

Ok, thanks for the info. I'll pass on it this time!

 

[SWCruiser]

Pricing

Okay. i have pretty much confirmed everything. The pricing will be $760.00 (came in a little higher due to shipping on the OZ side to port) for either the 80 or 100 series complete sets. I will include the rivnuts and bolts so it will be even easier... please read the installs before ordering so you know whats needed to complete the job and you don't have any surprises.. you will need to buy filler hose also...im not sure of the diameter. I have updated the list and sent PMs.. I will need a firm commitment on who is in as I don't want to be a subtank distributor..

 

[pkelly72]

Okay. i have pretty much confirmed everything. The pricing will be $760.00 (came in a little higher due to shipping on the OZ side to port) for either the 80 or 100 series complete sets. I will include the rivnuts and bolts so it will be even easier... please read the installs before ordering so you know whats needed to complete the job and you don't have any surprises.. you will need to buy filler hose also...im not sure of the diameter. I have updated the list and sent PMs.. I will need a firm commitment on who is in as I don't want to be a subtank distributor..

I sent you a pm

 

[UMMAGUMMA]

80 Series Sub-Tank

Hey Senor Kunz, Is it too late?I'm sure like to get on this for a 80 Sub-Tank.Confirmed commitment from me as well

 

[cpcc]

Hello, you have a confirmed commitment from me for both the 80 and 100 series tank set ups.

Yes, that is correct. I do want both.

Please let me know if you desire a small good faith deposit to confirm my intentions.

Cheers, CPCC, Bill