I recently purchased a 2009 LC200 (V8 Petrol) with 89,000 miles from a Lady that apparently never took this car offroading. The price was so attractive $20,000 that I only drove around the block, everything went smooth and did not test the 4x4 system because I thought this car was unbreakable. Now, 10 days later I decide to test the four-wheel drive system and it's simply not working.
Following the steps to engage 4x4 by putting in (N), then turning the switch from (4H) to (4L) to get the (4lo) signal starts blinking and does not stop (unless I switch to the car OFF and switch to 4H), no sound under the car, no beep on the dash or does nothing. I tried multiple times leaving it on (4L) and putting in (D) moving forward and (R) moving back and nothing. I lifted the car with someone under switch modes and there is no servo sound or any sound at all.
Furthermore, I decide to scan the vehicle with actually 3 OBD computers. The first one did not connect to the four-wheel drive ECU mentioning (No Connection) then I ran a second test with a different OBD and once more (No Connection) to the four-wheel drive ECU. So basically I cant tell what needs to be fixed. Please help! thanks!
Following the steps to engage 4x4 by putting in (N), then turning the switch from (4H) to (4L) to get the (4lo) signal starts blinking and does not stop (unless I switch to the car OFF and switch to 4H), no sound under the car, no beep on the dash or does nothing. I tried multiple times leaving it on (4L) and putting in (D) moving forward and (R) moving back and nothing. I lifted the car with someone under switch modes and there is no servo sound or any sound at all.
Furthermore, I decide to scan the vehicle with actually 3 OBD computers. The first one did not connect to the four-wheel drive ECU mentioning (No Connection) then I ran a second test with a different OBD and once more (No Connection) to the four-wheel drive ECU. So basically I cant tell what needs to be fixed. Please help! thanks!