Wanted 4.10 fine spline diff needed (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

3speed and TC shifter boot

I need the boots and the parts that bolt into the tub.

Thanks.

- Rico.
 
3speed and TC shifter boot

would those parts that bolt into the tub be the under dash handle and associated linkage. If so I have a set.
Mind you this is for a vacume transfer case.

Let me know.
:cheers:
 
3speed and TC shifter boot

[quote author=zetasig link=board=6;threadid=6684;start=msg54811#msg54811 date=1067004283]
would those parts that bolt into the tub be the under dash handle and associated linkage. If so I have a set.
Mind you this is for a vacume transfer case.

Let me know.
:cheers:
[/quote]


Is this for a FJ40? doesn't sound like it. I guess I should've specified.
 
3speed and TC shifter boot

Indeed for an FJ 40. The early ones with the three speed trans shift on the column, and three speed Transfer were vacuum actuated. Therefore there is not shift stick on the floor for the transfer. There is a handle / lever and linkage that bolts under the dash to engage the 4WD

See the spector catalog.
page 72 under 1968 shifters.
I have one from a 68 and one from a 70.
Sounds as if you only need the boots though.
 
3speed and TC shifter boot

I need

this
116a.gif



and this
116b.gif



let me know what you want for them including shipping. Send my and email to rico@fjwear.com

-thanks.
 
3speed and TC shifter boot

and a picture of them so I can see the condition.

- Thanks again.
 
3speed and TC shifter boot

:slap:Communication breakdown. :slap:I have the ones from a 68 and 70 they are not on the floor like the photos. Sorry bout that.

You might try CCOT if you cant find a decent used set. they dont look to be that expensive.
 
3speed and TC shifter boot

I don't want to pay that much but thanks for the help. There is someone on the PBB that might have some.


- Rico.
 
40 fenders, 60 drivers side fender ... ORE.

I still am looking for a good pair of OEM fenders, for a 75 fj 40 in good shape, older is ok. Not interested in aftermarket. I have a set to trade if you are going to trim yours. Also need a drivers side fender for an 84 fj 60. I have a drivers side 62 fender to trade if you need one (good shape, minor rust) Also have some sweet amby doors, PTO winch and parts for a 72 fj 55, early hard top sides-door and other stuff for trade. Prefer to deal nearby.
 
82 FJ40 Parts

just wanted to try this again.
 
Wanted: used 80's parts/accessorys

looking for savings on used or new parts and accessories for 91 fj80:

Low miliage transfer and/or part time 4wd TC conversion kit
rear full float axle with disks and locker.
conversion adaptors for gm trans to transfer- or gm engine to 440.
later model stock rims- or larger after market rims & tires
Arb bull bar with winch.
Kaymar rear tow bumper w/ tire carrier.
3/4 roof rack- dosn't cover sun roof.
safari snorkel
sliders

Might be interested in if price is right:
later model steering wheel & dashboard & innards.
later model interior pieces- door panels & center consol.
1hz/hd- take out complete running under 100k w/ trans & tcase
GM 6.5ltr TD w/w/o trans take out complete running under 100k
 
Anyone selling a BRUSH GUARD?

i have a center piece that mounts to the stock bumper...i guess you could call it a brush guard. I'll see if I can get some pics of it if you are interested. its BEEFY so shipping might be kinda high.
 
looking for a aluminum FJ40 tailgate w/storage

i have one sitting in my garage that i haven't gotten around to installing (its going to take soem extra work because of my custom rear bumper). I have had it for over a year. I think I paid $330 shipped...it is complete, I just opened it up when it arrived to make sure everything was there. Make me a good offer and I may part with it. :cheers:
 
65-45 wagon right rear lamp lense...

i don't have a tail light but i have some other parts from a 64
 
Extra Set of Wheels for FZJ 80

I want to purchase an extra set of wheels for my '96 FZJ-80 to run, larger, meatier tires during hunting season.

Does anyone want to get rid of a set?

Will
 
Need good auto trans for 1990 fj62

Is this the Lizard who bought my faithful 8274 Warn off my old Fj60?
Tenncrusher
 
Viscous coupler

I'm looking for an unwanted viscous coupler out of an FZJ80. It can be fried or not working. I just need it for a project that I'm working on. Thanks! :D
 

Users who are viewing this thread

Back
Top Bottom