3B bellhousings (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

cruiser_guy

Out of Africa / North Africa
Joined
Jan 20, 2003
Threads
369
Messages
11,224
Location
Wherever the truck stops!!
Website
join-hands-for-hope-helping-people-help-themselves.mailchimpsites.com
Hopefully the Aussies can help me here. Do all 3B's have the same bellhousings or is the Coaster/Dyna bellhousing different from a 'Cruiser?
 
I know I have two different bellhousings for the 3B. Same bolt patern on both ends but one has a cross member bracket and one does not. Also those out of the 42's don't have the tack sensor.

I know, not what you are looking for... :)
 
are you sure that the one with the frame mounts on it is for a 3B? the only one i have seen like that is the 77-78 B series engine BJ40...
cheers
 
Basically what I need to know is when I get my 3B down here it will be from a Dyna or a Coaster. I'm going to the wrecker tomorrow to get an H41 because the Dyna tranny I'm told is not 'Cruiser compatible. When I get the tranny, should I also get the 3B bellhousing? I assume the "B" and "3B" bellhousings have the same bolt pattern if that's what the tranny ends up coming from.
 
You are correct Wayne. My 78 that I swapped in a 3B using the B housing is the one with the cross member..
 

Users who are viewing this thread

Back
Top Bottom