3/23 is the March 2019 CLCC Tech Day (1 Viewer)

[Blue77FJ40]

I've always used a thin cutoff disc in my 4.5" grinder to cut the old pins out. Start with a new disc for the reach. Works a treat.

 

[TRFCSUX]

Does anyone have an air chisel ?? Could you bring it with you to tech day ??

 

[Stumpalama]

Does anyone have an air chisel ?? Could you bring it with you to tech day ??

I have one...

 

[JohnVee]

I sent my Motive Power Bleeder in case anybody needs to flush brakes but I forgot to send any of the generic hose to drain the bleed valves into a bottle. I suggest picking some up if you want to bleed and don’t have any already.

 

[davesax36]

I've always used a thin cutoff disc in my 4.5" grinder to cut the old pins out. Start with a new disc for the reach. Works a treat.

I keep one of those metal diamond edge wheels on mine now. I have a couple fresh ones that I'll bring.

 

[davesax36]

Aaanannnnnnnndddd barring a miracle of design and fabrication I'll be there in the Hyundai. Remind me next time I say, "I'll just build my own exhaust" how much of a pain it is to mock things up.

 

[1MOA]

Aaanannnnnnnndddd barring a miracle of design and fabrication I'll be there in the Hyundai. Remind me next time I say, "I'll just build my own exhaust" how much of a pain it is to mock things up.

You can park it next to my chevy truck or Ford van and we can be the "short bus" crew

 

[Stumpalama]

I sent my Motive Power Bleeder in case anybody needs to flush brakes but I forgot to send any of the generic hose to drain the bleed valves into a bottle. I suggest picking some up if you want to bleed and don’t have any already.

I've got that covered.

 

[Von Hayek]

Don't you guys think that @Skrewball should be at this?

 

[Stumpalama]

I hear he doesn't travel outside the 25 mile radius around F-burg...

Don't you guys think that @Skrewball should be at this?

 

[Stumpalama]

We have two threads going now... I am locking this one and adding this link to the other thread. CLCC Tech Day 3/23