I have a 77 FJ40 with 2F and having an issue with fan clearance. I've tried loosening the motor mounts and sliding everything back, but no luck, the motor is as far back as it will go. Same with the radiator support, it's as far forward as it will go. There's a place on the radiator where the fan has gotten into it. This happened before I got it. It's been apart for quite a few years and I'm just now putting it back together, but I never noticed it before I pulled it all apart. I'm going to post a few pics. Would any of you mind taking a look and see if you see anything obvious? I reused the fan and fan clutch. The water pump is new, but the pulleys line up, so I suspect it's OK. I'd appreciate any thoughts. Thank you!