1FZ head gasket? (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 29, 2022
Threads
5
Messages
18
Location
Bremerton, WA
Started with a cyl 6 misfire. Then started smoking when cold but stopping after gets to operating temp. Got a borescope in and found this first is cylinder 4, then 5, then 6. Looks to be coolant sitting in 6 😅

IMG_0785.jpeg


IMG_0786.jpeg


IMG_0787.jpeg
 
Started with a cyl 6 misfire. Then started smoking when cold but stopping after gets to operating temp. Got a borescope in and found this first is cylinder 4, then 5, then 6. Looks to be coolant sitting in 6 😅

View attachment 3431363

View attachment 3431364

View attachment 3431365
I'll take your word for on what you see.

What do the spark plugs look like?

If the "smoke" goes away are you sure it's not condensation?

What does the smoke smell like?
Maple syrup?
BBQ?
Forest fire?
Electrical fire?
Wet dog?

What other symptoms have you seen?
 
I'll take your word for on what you see.

What do the spark plugs look like?

If the "smoke" goes away are you sure it's not condensation?

What does the smoke smell like?
Maple syrup?
BBQ?
Forest fire?
Electrical fire?
Wet dog?

What other symptoms have you seen?
It smells sweet! Can’t say maple syrup though.
I also have had some missing coolant. And it doesn’t leak on the ground.
When it smokes there is a loss of power too.
 
It smells sweet! Can’t say maple syrup though.
I also have had some missing coolant. And it doesn’t leak on the ground.
When it smokes there is a loss of power too.
Next steps:
Compression test
Leakdown test
Exhaust gasses test on radiator.
 
Compression
1-180
2-180
3-180
4-170
5- about 162
6-180

Combustion gas leak test turned yellow didn’t get a pic though
So that's a positive test for gasses? I forget the colors.

My concern would be #5 based on compression readings.
 
So that's a positive test for gasses? I forget the colors.

My concern would be #5 based on compression readings.
Yeah positive gas test. The minimum pressure in the FSM is 124 but that’s what I thought just looks don’t match the readings
 

Users who are viewing this thread

Back
Top Bottom