gasket

  1. Josh Grewe

    Wanted Door handle pads and tail light lens gaskets 1976 FJ-55

    Looking to buy decent condition Door Handle Pads/Gasket (or whatever you call em) and Tail Light Gaskets for my 76 pig. Also looking for a working fan for the rear heater.
  2. mrjordann

    valve cover gasket too small?

    5/73 f engine. Machine shop gave me this gasket that's way too short. [1st pic] We ordered one (unaware that the machine shop already had) and this one seems to fit. 2nd pic shows the short gasket laid over the long one. Anybody know what's going on? Did I get an F.5 or 2F gasket from the...
  3. J

    It can be done. Differential seal replace - w/o pulling axles

    This is in relation to my previous post https://forum.ih8mud.com/threads/did-something-stupid.1066529/#post-11767030 where I had a front diff leak and was worried about water intrusion. Anyway, I eventually determined no water in the differential, but did confirm the leak was the differential to...
  4. bubfuji

    SOLD FJ60, FJ62 windshield seal, gasket

    FJ60/62 windshield gasket, seal Toyota factory part. Never installed. $50.00 +whatever shipping Please PM if interested
  5. E

    Baseline Maintenance Question?

    I am purchasing a 2003 LX470 with 116k miles. I will pick up the vehicle next week. Please tell me what items I should replace, change, inspect for wear, etc. to get it ready for its new home. I know the timing belt was replaced at 90k miles, and I assume the water pump at the same time...
  6. J

    mechanic wants to replace PLENUM GASKET with spark plug change?

    I received a quote from a local mechanic - after I told him I was interested in changing the spark plugs, he also added a note to change the PLENUM GASKET (Lexus Plenum Gasket 17116-50010 | LexusOfKendall) without inspecting the vehicle (2003 LX470). Did a search on the forum and didn't come...
  7. Cman

    Part Numbers for Exhaust Manifold Replacement Parts?

    Hi, I was looking for some part numbers related to my Driver Side exhaust manifold replacement on a 2000 Land Cruiser. It was lots of fun to take off, but i'll save that for another thread. 1) here are 8 nuts that hold the exhaust manifold to the engine. I'm not replacing the bolts because...
  8. Fuentesfranko

    HELP!!! Blown gasket question from long time lurker first time owner

    Hi guys, First time posting, happy to be part of the hang now as I just purchased a 1973 FJ40. My girlfriend and I are about to start a 2,000 mile roadtrip and we just found there was an air leak coming from the manifold gasket. We are supposed to leave in a few hours because of our schedule...
  9. F

    Oops! brake issue - punched through plate

    Made the msitake of NOT driving my '82 FJ60 often enough. Discovered that the ebrake wasn't releasing properly, and seemed to be causing the drums to drag. Decided that it might be time to look at the drumbrakes. Been driving the rig for almost 40K miles, and it's coming upon 210K total. No...
  10. J

    Exhaust Manifold

    I'm looking for some advice regarding the exhaust manifold surface that mates to the heat riser/intake. Do I need to clean up the surface any further(see pictures) or will the gasket compensate for the irregular surface? If so, what should I do to clean up? I do plan to eliminate the heat...
  11. S

    Fresh air vent gasket on window frame

    hello I'm wondering if anyone has ordered the replacement gasket for this cowl/fresh air vent located on the windshield frame of an fj45. If so did you have to grind out the tack welds out and separate the inner and outer piece of the metal to get the new gasket in place. Or of the new gasket...
  12. Y

    For Sale 40 series window cushion gasket oem

    Sold Oem wind shield cushion gasket, pristine, no cracks, not brittle, supple rubber no micro cracks. Super freshy! $80 will ship in cont us for free
  13. 2001LC

    Anyone recognize this gasket, found in e-brake drum area of rotor??

    I found this inside rear rotor e-brake drum area. What is it from/for???? Seem thick for the area, if axle pulled!
  14. G

    FZJ80 - Gasket Replacement

    Hello All, Over the weekend I noticed a leak in the front of the car. 1997 Fzj80 120k miles. I found a video on youtube describing the issues and fix. He talks about fixing the 3 gaskets : O-Ring Shaft of distributor, Main Front seal on Crank (crank-case seal), Oil pump cover gasket O-Ring...
  15. mtweller

    2F / 3FE Timing Cover gasket

    Longshot: Anybody have a 2F timing cover gasket laying around? I ordered one Monday but it won't be here for the weekend and was hoping to finish off a project. Would need to be triangle area. :beer: Ramon
  16. cmadness

    Head gasket time, yay!

    First off please forgive me for starting another thread on the subject, but I figured there might be some new info out there. Also, ever since I got my new cruiser a year ago I really haven't been too active on the site like I was years ago with my first cruiser and I'd like to rectify that...
  17. Mattyboy

    Valve Cover gasket repair.

    I am going to attempt to either repair this myself this weekend, or pay to have it done:( I am afraid that i will break something, or it will go wrong and then I have my truck stuck in the garage at work. That will be bad come Monday. I have the o ring for the Distributor and a gasket with...
  18. toadshade

    Fender Flare gasket repair/replacement tip

    I just wanted to throw this out there for anyone who has installed the fender flare gaskets. They come with an adhesive strip that connects to the flare itself. When I first tried to attach the gasket, It was a little tricky. If the gasket is not placed low enough on the flare, it sticks out...
  19. dr_dobro

    For Sale FJ40 windshield gasket 196X?

    Good shape, rust is obviously from windshield and cowl Asking $ 38 shipped conus
  20. ryanrtxtx

    For Sale FJ80 Fender Flares and Gasket Set

    I purchased a set of flares and gaskets from @jamisobe who makes great flares for the FJ80 a couple months ago. Search other threads here to see pictures of his work. Before I could get around to installing, I ended up selling my FJ80. This set is still wrapped up as I received them from...
Top Bottom