1987 rear heater hoses

[Michael Hanson]

Hi, Many threads, I know ,read most . What’s the best hose for this 5/8 is to big. Thanks, Mike

 

[2mbb]

which ones?

 

[Michael Hanson]

87255e or bottom two under the heater. Thanks, Mike

 

[Michael Hanson]

Last two gates I bought for the heater won’t stop leaking,maybe I just got some bad ones.

 

[2mbb]

Those are 1/2" molded 90degree bends. Gates 28460 is a substitute (for the FJ60). Is this for a 60 or 62?

 

[S.CarolinaFZJ80]

Those are 1/2" molded 90degree bends. Gates 28460 is a substitute (for the FJ60). Is this for a 60 or 62?

Good catch. I assumed it was a 60 due to year for the US market.

 

[3_puppies]

which clamps are you using?
the tubes deform easily

 

[Spike Strip]

And as 3_Puppies alludes, use the OE-style Constant-torque spring style hose clamp.

The 90* ones (as listed above) kink since the bend is more like 110 degrees.

More Information for GATES 18453

www.rockauto.com

(all this info is in da FAQ).

 

[Michael Hanson]

1987 fj60

 

[S.CarolinaFZJ80]

I found the thread where the 18453 was discovered by @Littlebilly
More good info on Gates hoses in place of the Toyota ones

Found a good heater hose replacement for external heater

I found a good replacement heater hose for the external heater—the ones under the truck gates # 18452

forum.ih8mud.com

I found a good replacement heater hose for the external heater—the ones under the truck

gates # 18453View attachment 2247939

 

[Michael Hanson]

Thanks, Done used the gates 1/2 90s.