1962 FJ40 Resto (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

a.greenspan said:
Hi John

b) no ( but`s fine ) see pic
Click to expand...

I agree with both a fine on this early cruiser and the glass. I guess I should of said that of the five rear hatches I have only one has the extra glass but don't think it was original. I've seen on other cruiser too, think they were added to help with the poor vision out of the high little stock window.
 
I have not seen one original sales brochure with two windows on the bi-fold...but I agree that it must help!!! The funny thing is that there is a recess in the bottom panel as if a second window SHOULD be there.
 
Mike, what did you use for the short running board matts? I looked around, but can't seem to get anything that looks stock :frown:
 
a.greenspan said:
Hi John
a ) yes :) ( great job Mike :clap:)
b) no ( but`s fine ) see pic

c) Mike, I would spray the rear bumper bolts in car colour ;)



again : Great resto !!!!!!

Cheers
Peter
Click to expand...

Wow.... I've just assumed that mine was stock. And yes I've got to cover up all those stainless bolts.

Thanks, Mike
 
Did you finish it off with some OEM decals from shane like the engine adjust, f135, oil bath cleaner.
 
You've done an awsome job on your truck, I really like it well done.
 
mbradshaw said:
I found a discussion thread that referenced this Pyramid Vinyl Matting that I ordered. I'll upload a photo later today.

Here is the link to the website:
Pyramid Vinyl Matting - Canal Rubber Supply Company

Thanks, Mike
Click to expand...

Hi Mike, thanks for the link!! Can't wait to a close up picture when you get a chance. I am working on that taillight this week-end, and should have something to show next week...that is as long as no one drops in ;)
 
My wife said no FJ! said:
Hi Mike, thanks for the link!! Can't wait to a close up picture when you get a chance. I am working on that taillight this week-end, and should have something to show next week...that is as long as no one drops in ;)
Click to expand...
Hi Dean,
I bought such mats, looks good , easy to cut, not so pricy ;)

Feinriefenmatte-Matte.jpg

Cheers
Peter



 
Last edited:
wesintl said:
Did you finish it off with some OEM decals from shane like the engine adjust, f135, oil bath cleaner.
Click to expand...

I have not done that yet.... point me toward Shane though. Thanks, Mike

mbradshaw said:
I found a discussion thread that referenced this Pyramid Vinyl Matting that I ordered. I'll upload a photo later today.

Here is the link to the website:
Pyramid Vinyl Matting - Canal Rubber Supply Company

Thanks, Mike
Click to expand...

Here is the photo of the Pyramid Matting I used.
IMG_9201b.webp
 
1962 FJ40 Hard Doors

Nice Job on the 62', I have one that was handed down to me by my Dad and its been in the family for 37yrs. But my question is do you have any pics showing the restore on the doors?? I have the original doors for mine and want to get them back on the Cruiser. They fit so much nicer than the newer style doors with the window reg. I'm missing all of the pieces that are used to latch the window up and down. I have been searching for some time to get info so I can start working on them. I also need to know where I can find the correct parts and schematics to do the restore. Seeing yours just makes me want to start in on mine that much more!! I'm on facebook if you want to look me up there. I have a few pics posted of my FJ40 on there too!
THANKS in advance for your help!
Greg Hobbs
Phx, AZ
 
Last edited:
AzWrangler73 said:
Nice Job on the 62', I have on that was handed down to me by my Dad and its been in the family for 37yrs. But my question is do you have any pics showing the restore on the doors?? I have the original doors for mine and want to get them back on the Cruiser. They fit so much nicer than the newer style doors with the window reg. I'm missing all of the pieces that are used to latch the window up and down. I have been searching for some time to get info so I can start working on them. I also need to know where I can find the correct parts and schematics to do the restore. Seeing yours just makes me want to start in on mine that much more!! I'm on facebook if you want to look me up there. I have a few pics posted of my FJ40 on there too!
THANKS in advance for your help!
Greg Hobbs
Phx, AZ
Click to expand...

POst up some photos :)D

We love photos here :)
 
Finding parts for these is going to be tuff. Plus getting pictures of the inside of the door is hard. I have the the 62 FSM but the diagrams in there are pretty lame. I have the 62 FJ40 micrifiche too. I think the parts diagram was better than the FSM. I look at my FJ25 parts book and see what is in there, those were the same doors. Not sure what later doors your trying make work but the early with a window regulator and bug catcher vent windows should be a perfect fit. You could always find someone local to let you looks at the slide system. I use to live in Phoenix but have since moved. I now live in Peoria:rolleyes:
 
Beautiful resto on the '62.
 
Here are a few pics of my 62' and door

Hey guys here are a few pics of my FJ40 and the doors I'm trying to restore. I also was trying to post one from 1975 but I have to change the format of the pic.
Had to delete a few pics so I could start my thread and become a Member for more pics.
 
Last edited:
You must log in or register to reply here.

Similar threads

DrRock
1962 FJ40 Doors and Top- Where to Source
Replies
8
Views
1K
rainingagain
R
59fj25
Seeking Guidance on Restoring a 1959 FJ Cruiser Hardtop
Replies
17
Views
2K
Indygbd
Indygbd
A
Early 36 Spline Steering Wheel, Horn Button & Bits - New Zealand
Replies
0
Views
516
Archie 1962 FJ25
A
Krondor
Trade 1965 FJ40 steering box
Replies
0
Views
80
Krondor
Krondor

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom